89
[CAMERA CONTROL] Terminal at the Rear
of VR-N900U (VR-N900U)
The analog camera acts as a network encoder (IP video server) in
the VR-N900U system, and the device name assigned to it is
[N900]. The [CAMERA CONTROL] terminal at the rear is assigned
as
on the Camera Settings screen.
E
For specifying whether the camera corresponding to the selected number is [Fixed] or [Moveable].
: Fixed Camera
: PTZ Camera
F
This option is enabled only if
is selected in the [Camera Type] item
E
.
For specifying which control port on the network encoder (IP video server) to use for controlling the PTZ features.
G
This option is enabled only if
is selected in the [Camera Type] item
E
.
Use this option to specify the port address of the camera. The port address is usually set to
If the PTZ cameras are serially connected, they are identified by their the port addresses. Refer to the camera’s
[INSTRUCRTIONS] for the recommended settings.
