71
Item
Preset Values
Description
Reference
Page
G
Lets you specify the settings for the serial ports controlling the
cameras. Please refer to the [Instruction Manual] of the camera in
use to configure the parameters correctly for all settings.
^
䢇
䢇
䢇
䢇
H
䢇
Lets you select the encoding mode for converting analog image
data into digital data. You can choose from the following three
modes.
Specify the encoding size control method and target file size when
encoding JPEG files.
Variable File Size:
The file size increases or decreases depending on the image.
Specify this to maintain a constant image quality.
Memo :
●
Note that maximum recording time varies when recording JPEG
files with this option as the file size increases or decreases.
Average File Size:
Multiple JPEG files are encoded to reach the designated size as
average size.
Constant File Size:
Each JPEG file is encoded to reach the designated size. The
processing load is heavy with
decreases the maximum processing frame rate to approximately
one quarter of the value.
Memo :
●
Specify the designated size using the [Quality] bar on the
[Configure Device] screen under [Camera Record Setting].
^
䢇
Select check box
Do not select
check box
Select this check box to eliminate the comb-shaped noise (noise
that appears jagged) of the moving object. .
I
Enables you to specify the mail recipient if you have selected
C
. To add a new recipient, type the e-mail
address in the entry field and click the [Add] button. To remove an e-
mail address from the notification list, select the required e-mail
address in the [List] and click [Delete].
^
^
^
J
Closes the Unit Setting screen.
^
