63
Adding Cameras to a View
1
Select a view
●
The layout of the selected view appears.
2
Click the [+] mark to the left of [Server] under
●
A list of available cameras appears.
3
Select the camera you want to add from the list,
and drag the camera name over the screen of
the view on the right
●
An image from the selected camera appears together with
the camera name.
●
Repeat the procedure for each camera that you want to
add.
Memo :
●
Images from a total of 16 cameras can be simultaneously
displayed. (VR-N1600U/E)
●
Images from a total of 9 cameras can be simultaneously
displayed. (VR-N900U)
Adjusting Camera Settings
1
Select the camera you want to adjust on the
[Screen Setup] screen
2
Select [Properties]
3
Adjust the following camera settings
accordingly
2
[Screen Setup] Screen
Camera
List
Item
Description
A
Displays the name of the selected camera.
(This is a read-only field.)
B
Enables you to adjust the image resolution
and picture quality during viewing. Select
[Full] at all times.
C
This is the viewing frame rate.
Select [Unlimited] (default value; same as
live settings), [Medium] (25 % of the frame
rate), or [Low] (5 % of the frame rate),
depending on the frame rate specified in
[Live Settings] (
Page 56) on the
D
If this check box is selected, images will
not be stretched to fit the size of the
display position. Images will be displayed
in the aspect ratio (horizontal to vertical
ratio of the screen) that they have been
recorded.
E
If this check box is selected, the camera’s
images will only be updated on the [Live]
screen when motion is detected.
F
Enables notification with a simple sound
when motion is detected while viewing
images from the camera on the [Live]
screen.
Does not produce sound notification when
motion is detected.
Notifies with a sound each time motion is
detected.
A
B
C
D
E
F
G
H
