background image

6

Getting Started

Microsoft Software License Terms for: 
(continued)

4

Windows Update Agent (also known as Software Update Services).

The software on the device includes Windows Update Agent (

WUA

) functionality that may enable your device to connect 

to and access updates (

Windows Updates

) from a server installed with the required server component.  Without limiting 

any other disclaimer in this Micrososoft Software License Terms or any EULA accompanying a Windows Update, you 
acknowledge and agree that no warranty is provided by MS, Microsoft Corporation or their affiliates with respect to any 
Windows Update that you install or attempt to install on your device.

5

Product Support.

Contact JVC for support options.  Refer to the support number provided with the device.

6

Backup Copy.

You may make one backup copy of the software.  You may use it only to reinstall the software on the device.

7

Proof Of License.

If you acquired the software on the device, or on a disc or other media, a genuine Certificate of Authenticity label with a 
genuine copy of the software identifies licensed software.  To be valid, this label must be affixed to the device, or included on or 
in JVC

s software packaging.  If you receive the label separately, it is not valid.  You should keep the label on the device or 

packaging to prove that you are licensed to use the software.  
To identify genuine Microsoft software, see http://www.howtotell.com.

8

Transfer to a Third Party.

You may transfer the software only with the device, the Certificate of Authenticity label, and these license terms directly to a
third party.  Before the transfer, that party must agree that these license terms apply to the transfer and use of the software.
You may not retain any copies of the software including the backup copy.

9

Not Fault Tolerant.

The software is not fault tolerant.  JVC installed the software on the device and is responsible for how it operates on the device.

10

Restricted Use.

The Microsoft software was designed for systems that do not require fail-safe performance.  You may not use the Microsoft 
software in any device or system in which a malfunction of the software would result in foreseeable risk of injury or death to any 
person.  This includes operation of nuclear facilities, aircraft navigation or communication systems and air traffic control.

11

No Warranties for the Software.

The software is provided 

as is

.  You bear all risks of using it.  Microsoft gives no express warranties, guarantees or 

conditions.  Any warranties you receive regarding the device or the software do not originate from, and are not binding on, 
Microsoft or its affiliates.  When allowed by your local laws, JVC and Microsoft exclude implied warranties of merchantability,
fitness for a particular purpose and non-infringement.  

Summary of Contents for LST0728-001B



































































































































































Reviews: