Performing Live
Streaming
By combining with the decoder or PC application
that supports live streaming, you can perform audio
and video streaming via the network.
Supported Codecs
H.264, H.265, Motion JPEG
Supported Formats
[Streaming resolution (First Stream)]
3840x2160, 1920x1080, 1280x720, 1024x576,
720x480, 720x408, 640x480, 640x360
[Streaming resolution (Second Stream)]
720x480, 720x408, 640x480, 640x360, 480x320,
320x240
[Frame rate (for streaming resolution of
3840x2160)]
30p, 29.97p, 25p
[Frame rate (when streaming resolution is other
than 3840x2160)]
60p, 59.94p, 50p, 30p, 29.97p, 25p
[Audio]
AAC, 48kHz, 96kbps/128kbps
Memo :
0
The range of configurable resolutions and
bitrates varies according to the codec that has
been selected.
0
Depending on the connection environment,
images and audio sound during live streaming
may be choppy.
Supported Protocols
RTSP/RTP, RTMP/RTMPS, SRT, MPEG2-TS/
RTP, MPEG2-TS/UDP, NDI
|
HX
W
Setting Distribution
1
Configure the streaming video and audio
format.
Configure the codec, resolution, frame rate and
bitrate settings in [Video] and [Audio] of the
View Remote.
2
Set the distribution protocol.
Configure the streaming protocol and related
items in the [Network] settings of the View
Remote.
3
Restart the camera.
After configuring the different items, press the
[Submit
＆
Reboot] button to restart the camera.
Alternatively, press the [Submit] button followed
by pressing the [Reboot] button in the [System]
menu to restart the camera.
Receive streaming data
Streaming starts automatically after the camera
has restarted. Configure the necessary settings for
the decoder and PC application to receive
streaming data.
o
URL when receiving streaming data using
RTSP/RTP
0
First Stream
rtsp://<IP address of this unit>:<Port no.>/1
0
Second Stream
rtsp://<IP address of this unit>:<Port no.>/2
(Example) rtsp://192.168.0.10:554/1
o
When receiving streaming data using RTMP(S)
Enter the server and stream key into the MRL field
under the RTMP(S) setting in the [Network]
settings of the View Remote, and view the content
from the designated video link after restarting the
camera.
o
URL when receiving streaming data using SRT
srt://<IP address of this unit>:<Port no.>?
mode=<SRT mode>
(Example) srt://192.168.0.10:4578?mode=caller
o
URL when receiving streaming data using
MPEG2-TS
rtp://@:<Port no.>
(Example) rtp://@:6688
rtp://<IP address for MPEG2-TS>:<Port no.>
(Example) rtp://192.0.2.1:6688
udp://@:<Port no.>
(Example) udp://@:6688
udp://<IP address for MPEG2-TS>:<Port no.>
(Example) udp://192.0.2.1:6688
o
When receiving streaming data using
NDI
|
HX
W
Install the NDI Tools on the PC for viewing. For
more information, please refer to the instruction
manual of the NDI Tools.
40
Performing Live Streaming
Connecting to the Network
Summary of Contents for KY-PZ510BE
Page 59: ...59 ...
