background image

Software License

Agreement

The software embedded in the Product (hereinafter

the “Licensed Software”) provided by

JVCKENWOOD Corporation (hereinafter the

“Licensor”) is copyrighted to or sublicensable by the

Licensor, and this Agreement provides for the terms

and conditions which Users shall follow in order to

use the Licensed Software. The User shall use the

Licensed Software by agreeing with the terms of this

Software License Agreement. This Agreement shall

be deemed completed at the time the User

(hereinafter the “User”) initially used the Product in

which the “Licensed Software” is embedded.

The Licensed Software may include the software

which has been licensed to the Licensor directly or

indirectly from any third party. In such case, some

third parties require the Users to follow their

conditions for use separately from this Software

License Agreement. Such software shall not be

subject to this Agreement, and the Users are urged

to read the “Important Notice concerning the

Software” to be provided separately.

Article 1 General Provision
The Licensor shall grant to the User a non-exclusive

and non-transferable (other than the exceptional

case referred to in Article 3, Paragraph 1) licensed

to use the Licensed Software within the country of

the User (the country where the User bought the

Product (hereinafter the “Country”)).

Article 2 License
1. The license granted under this Agreement shall be

the right to use the Licensed Software in the Product.

2. The User shall not duplicate, copy, modify, add,

translate or otherwise alter, or lease the Licensed

Software and any related documents, whether in

whole or in part.

3. The use of the Licensed Software shall be limited

to personal purpose, and the Licensed Software

shall not be distributed, licensed or sub-licensed

whether it is for commercial purpose or not.

4. The User shall use the Licensed Software

according to the directions described in the

operation manual or help file, and is prohibited to use

or duplicate any data in a manner violating the

Copyright Law or any other laws and regulations by

applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License
1. When the User transfers the Product, it may also

transfer the license to use the Licensed Software

embedded in the Product (including any related

materials, updates and upgrades) on condition that

no original, copies or related materials continue in

the possession of the User, and that the User shall

cause the transferee to comply with this Software

License Agreement.

2. The User shall not carry out reverse engineering,

disassembling, decompiling or any other code

analysis works in connection with the Licensed

Software.

Article 4 Right pertaining to the Licensed

Software
1. Any and all copyrights and other rights pertaining

to the Licensed Software and related documents

shall belong to the Licensor or the original holder of

the right who granted to the Licensor the license or

sublicense for the Licensed Software (hereinafter

the “Original Rightholder”), and the User shall not be

entitled to any right other than the license granted

hereunder, in respect of the Licensed Software and

any related documents.

2. The User shall, whenever the User uses the

Licensed Software, comply with any laws relating to

the copyright and other intellectual property rights.

Article 5 Indemnification of Licensor
1. Neither the Licensor nor the Original Rightholder

shall be liable for any damage incurred by the User

or any third party due to the exercise of the license

granted to the User under this Agreement, unless

otherwise restricted by law.

2. The Licensor will offer no guarantee for the

merchantability, convertibility and consistency with

certain objective of the Licensed Software.

Article 6 Liability to Third Party
If any dispute has arisen with any third party due to

an infringement upon a copyright, patent or any other

intellectual property right that was caused by the

User’s use of the Licensed Software, the User shall

settle such dispute at the User’s own cost and hold

the Licensor and the Original Rightholder harmless

from any inconvenience it may cause.

Article 7 Confidentiality
The User shall keep the confidentiality of such

portion of the Licensed Software, related documents

thereof or any other information to be granted under

this Agreement, as well as the conditions of this

Agreement as has not yet entered the public domain,

and shall not disclose or divulge the same to any third

party without approval of the Licensor.

Article 8 Termination
In case the User falls under any of the events

described in the following items, the Licensor may

immediately terminate this Agreement or claim that

the User compensates for the damage incurred by

the Licensor due to such event:

(1) when the User violated any provision of this

Agreement; or

(2) when a petition has been filed against the User

for an attachment, provisional attachment,

provisional disposition or any other compulsory

execution.

Software License Agreement

49

Others

Summary of Contents for KY-PZ200 Series





















































Reviews: