Changing Common LAN/USB
Connection Settings
For specifying network settings that are common
between the LAN and USB terminals.
.
A
B
C
D
E
A
Default Gateway
For selecting whether to use the default
gateway setting for the LAN or USB terminal.
Select LAN if the router for connecting to an
external network is located at the LAN terminal.
Select USB if you want to access an external
network via an adapter that is connected to the
USB terminal. If you are connecting a cellular
adapter to the USB terminal, select USB.
B
FTP Proxy
Select HTTP if you are using a proxy for FTP
transfer.
C
FTP Proxy Settings
For setting the server name and port number if
you are using an FTP proxy.
D
Camera Name
For setting the camera name that appears at the
bottom left corner of the Live View screen.
* Enter not more than 8 characters using
single-byte alphanumeric characters (a to z,
0 to 9), single-byte hyphen [-], underscore [_]
or space [ ].
E
[OK]/[Cancel] Button
For saving the settings or canceling the action.
Changing LAN Connection Settings
You can change the settings for each of the preset
items on the [LAN Wizard] screen of the camera
recorder.
.
F
A
B
C
D
G
E
A
DHCP
For selecting whether to use DHCP or not.
If you are using DHCP, select “On” and press
the [OK] button. The following items will be
grayed out when “On” is selected, and input is
not required.
If you are not using DHCP, select Off, input
accordingly for the following items and press
the [OK] button.
B
IP Address
For entering the IP address of the camera.
C
Subnet Mask
For entering the subnet mask of the camera.
D
Gateway (Optional)
For entering the gateway address. (Optional)
E
DNS1 (Optional)
For entering the primary DNS server address.
(Optional)
F
DNS2 (Optional)
For entering the secondary DNS server
address. (Optional)
G
[OK]/[Cancel] Button
After changing of settings is complete, click the
[OK] button.
88
Changing Settings
Con
nectin
g to the Network
