10
To play back video images recorded by the memory
recorder, select a clip from the clip selection screen on the
LCD panel of the memory recorder. The selected video clip
is played back on the LCD monitor and viewfinder of the
camcorder.
Memo
:
●
Before playing back video images recorded by the memory
recorder, stop the playback of the cassette tape in the
camcorder.
●
Images on the LCD monitor and viewfinder of the
camcorder may be distorted when in the Still and Fast
forward/Fast reverse modes.
Setting
s
Prior to Playback
Before playing, it is necessary to configure the camcorder
and memory recorder settings.
䡵
Camcorder
s
etting
s
1
Set to the
A
VTR
B
mode u
s
ing the [CAM/VTR]
button
2
Set the [IEEE1
3
94]
s
witch to the
A
HDV
B
end
䡵
Memory recorder
s
etting
s
For procedures to set the menu screen, refer to page 11.
1
Set the video format
●
Set the RESOLUTION and FRAME/RATE under the
[SYSTEM] settings on the menu screen. (
Note:
●
Set according to the format settings of the camcorder.
Playback cannot be executed if the camcorder and
memory recorder settings are different from each other.
Playing a Clip from the SxS Memory
Card
If the memory recorder is in the standby mode, press the
[STOP] button on the recorder to switch to the stop mode.
1
Pre
ss
the [PLAY/STILL] button
Memo
:
●
Playable clips are indicated by a check mark (
) at the
front of their names.
●
The clip indicated by the cursor (
) is the selected clip.
2
Pre
ss
the [NEXT] or [PREV] button to
s
elect a
clip to play
●
Select a clip that has a check mark.
●
To play back a clip without a check mark, it is necessary to
configure the camcorder and memory recorder according
to the video format settings, which are displayed when the
clip is selected.
3
Pre
ss
the [PLAY/STILL] button to
s
tart playback
●
The video clip is played back on the LCD monitor and
viewfinder of the camcorder.
●
The progress bar on the LCD panel of the memory
recorder moves to indicate the current playback position.
●
Press the [PLAY/STILL] button during playback to switch
to the still mode. Press the button again to resume
playback.
Memo
:
●
When multiple video clips are stored in the SxS memory
card, the playable clips are played back continuously in
se
q
uence. Playback switches to the still mode at the end
of the last clip.
4
Pre
ss
the [STOP] button to
s
top playback of the
clip
The LCD panel display switches to the status screen.
Fast forwards or fast reverses the selected clip. It will switch
to still mode at the end or beginning of the selected clip. To
switch to the still mode during fast forward or fast reverse,
press the [PLAY/STILL] button.
䡵
Pre
ss
ing the [FWD] button in the
s
till mode,
during playback or fa
s
t rever
s
e
Switches to the low speed fast forward (F1) mode. Press the
[FWD] button again to switch to the high speed fast forward
(F2) mode.
䡵
Pre
ss
ing the [REV] button in the
s
till mode,
during playback or fa
s
t forward
Switches to the low speed fast reverse (R1) mode. Press the
[REV] button again to switch to the high speed fast reverse
(R2) mode.
Skips to the next or previous playable clip.
䡵
Pre
ss
ing the [NEXT] button in the
s
till mode or
during fa
s
t rever
s
e
Doing so switches automatically to the still mode after
skipping to the beginning of the next clip. Pressing the button
twice switches to the still mode after skipping to the
beginning of the second clip from the current one.
䡵
Pre
ss
ing the [PREV] button in the
s
till mode or
during fa
s
t rever
s
e
Pressing this button during playback of the clip switches
automatically to the still mode after skipping to the beginning
of the selected clip. Pressing the button again skips to the
beginning of the previous clip and remains in the still mode.
䡵
Pre
ss
ing the [NEXT] button during playback or
fa
s
t forward
Pressing the button starts playback automatically from the
beginning of the next clip. Pressing the button twice starts
playback from the beginning of the second clip from the
current one.
䡵
Pre
ss
ing the [PREV] button during playback or
fa
s
t forward
Pressing this button during playback of the clip starts
playback automatically from the beginning of the selected
clip. Pressing the button at the beginning of the clip starts
playback from the beginning of the previous clip.
Playing Video Image
s
Recorded in the Memory
Recorder
Normal playback
[PREV]
button
[REV]
button
[PLAY/STILL] button
[FWD] button
[STOP] button
[NEXT]button
<LCD Panel>
<Buttons to use>
Fa
s
t forward/Fa
s
t rever
s
e
Skip
KA-MR100G_EN.book Page 10 Thursday, February 5, 2009 5:28 PM
