JVC JY-HM360AG, Instructions Manual

Page: 55 / 136

Using the Image Stabilizer
Reduces blurring of images due to camera shake.
1
Check whether the image stabilizer feature
is turned ON or OFF.
If the image stabilizer icon (
i
/
j
) does not
appear on the screen display, the image
stabilizer function is OFF.
.
P 13000K 1/ 100
F1. 6
0
dB
AE
+
6
ND 1 /64
12 :34 : 56
Jan 12, 2016
00: 00: 00.00
4030 20 10 0
5 . 6f t
2
Press the [OIS/2] button to turn ON the
image stabilizer feature (when image
stabilizer feature is OFF).
The image stabilizer feature switches between
ON and OFF with every press of the [OIS/2]
button.
0
OFF:
Use this setting when the camera recorder is
secured, such as when using a tripod.
0
ON:
Reduces blurring of images due to camera
shake.
Memo :
0
Select [Main Menu]
B
[Camera Function]
B
[OIS]
B
[Level] to set the correction level.
(
A
P87 [ Level ] )
0
Correction by this feature may not be sufficient
when camera shake is too strong.
0
“OIS” is assigned to [OIS/2] button in factory
default.
0
“OIS” can also be assigned to other user
buttons.
(
A
P32 [Assignment of Functions to User
Buttons] )
0
The angle of view becomes narrower at the wide
angle end when the image stabilizer function is
turned ON (High).
Audio Recording
You can record audio from the two channels (CH1/
CH2) in synchronization with video images on this
camera recorder.
Select from the four options below to record the
audio.
0
Built-in Microphone
0
Microphone connected to [AUX] terminal
0
Microphone connected to [INPUT1] terminal
0
Microphone connected to [INPUT2] terminal
.
FULL AUTO
ON
OFF
CH1
INT
INPUT1
INPUT2
AUTO
MANUAL
CH2 INPUT2 INPUT1
PEAKING LCD BRIGHT
CH2 CH1
LINE
MIC
MIC
+48V
INPUT2
INPUT1
AUX
POWER
/CHG
Selecting Audio to Be Recorded in Each
Channel
Select the audio to be recorded in CH1/CH2.
- Switch Setting Connected Devices
CH1 INT 0 Built-in Microphone
0 Microphone connected to
[AUX] terminal
INPUT1 Microphone connected to
[INPUT1] terminal
CH2 INT 0 Built-in Microphone
0 Microphone connected to
[AUX] terminal
INPUT1 Microphone connected to
[INPUT1] terminal
INPUT2 Microphone connected to
[INPUT2] terminal
Memo :
0
When “INT” is set, the built-in microphone is
disabled if a microphone is connected to the
[AUX] terminal; audio from the microphone
connected to the [AUX] is recorded.
0
When “INT” is selected, set the reference input
level in [Main Menu]
B
[A/V Set]
B
[Audio Set]
B
[Int. Mic Gain]/[AUX Gain].
(
A
P99 [ Int. Mic Gain ] )
(
A
P99 [ AUX Gain ] )
Using the Image Stabilizer
55
Sh
ooting