JVC JY-HM360AG Page 30 Instructions Manual Download

Page: 30 / 136

Adjusting the LCD Monitor

and Viewfinder

You can monitor video images on this camera

recorder using the viewfinder, LCD monitor, or

both.

DISPLAY

Normal LCD

Inverted
LCD

Displays on the LCD Monitor and

Viewfinder Screen (VF)

When [LCD/VF]

[LCD + VF] is set to “Off”

(

P94 [ LCD + VF ] )

LCD Monitor Status

LCD Display VF Display

LCD closed Normal LCD OFF

Inverted LCD ON

OFF *

LCD opened Normal LCD ON

OFF *

Inverted LCD ON

OFF *

* Turns on when [LCD/VF]

[LCD + VF] is set to

“On”.
Memo :

Press and hold the [DISPLAY] button for 2 seconds

to turn ON/OFF the LCD monitor.

The function to switch between LCD monitor and

viewfinder displays by pressing the [DISPLAY]

button can be canceled by opening/closing or

rotating the LCD monitor.

The viewfinder screen is always displayed when

[LCD/VF]

[LCD + VF] is set to “On”.

You can display both the LCD monitor and

viewfinder screens at the same time by setting

[LCD/VF]

[LCD + VF] to “On”.

(

P94 [ LCD + VF ] )

Adjusting the LCD Monitor

PEAKING

LCD BRIGHT

Tilt 90 degrees

downward

Tilt 180 degrees
upward

Open the LCD cover.

Incline the LCD monitor to a position that

enables easy viewing.

Rotate the LCD monitor to adjust the angle.

While the LCD monitor is open, you can

rotate it 180 degrees upward or 90 degrees

downward.

Rotating the LCD monitor 180 degrees

upward enables you to see the screen from

the lens side. To display the image when it is

viewed from the opposite direction (mirror

image), perform setting as follows.

Set [Main Menu]

[LCD/VF]

[LCD

Mirror] to “Mirror”

Set button (

)

(

P94 [ LCD Mirror ] )

Adjust the brightness, contour, and

contrast of the LCD monitor.

You can change the angle and brightness of the

LCD monitor according to your usage condition.

Changing the brightness of the screen will not

affect the recorded images.

Adjusting the Brightness

Use the [LCD /

－

] button to adjust the

brightness of the LCD monitor.

The [+] button brightens the monitor and the

[

－

] button darkens it.

Press the [+] and [

－

] buttons simultaneously

to return to standard settings.

During adjustment, the brightness level is

displayed on the LCD monitor.

13000K

1/ 100

F1. 6

4030 20

LCD BRIGHT

-10

Adjusting the LCD Monitor and Viewfinder

ati

ons

Summary of Contents for JY-HM360AG









































































































































Search results

Summary of Contents for JY-HM360AG

Reviews:

Related manuals for JY-HM360AG

Brands by name

Popular brands

JVC JY-HM360AG, Instructions Manual

Search results

Summary of Contents for JY-HM360AG

Reviews:

Related manuals for JY-HM360AG

Brands by name

Popular brands