JVC InteriArt LT-26A61BU Service Manual Download Page 97

Page: 97 / 174

LT-32/26A61BU/SU / LCT1996-001A-U / English

Using the TV’s menu

This TV has a number of functions you can

operate using menus. To use all your TV’s
functions, you need to understand the basic
menu operating techniques fully.

Buttons used to operate the menus

Basic operation

1 Press the

button to display

the menu bar

2 Press the

buttons to choose

the menu you want to use and then

press the

button

3 Press the

buttons to choose

the item to be set, press the

buttons to set the item, and then

press the

button

If there are sub-menus, use the

buttons to operate them.

• Press the

button to return to

the previous menu.

• Press the

button to exit

from the menu.

• Some menu items may not be operated

or set depending on the TV status or

other menu item settings.
Menu items that cannot be operated or
set are displayed in grey in the menu

and cannot be chosen.

Types of menu

• The menu will disappear after about

one minute if no operation is
performed.

Operation with the buttons on the TV

You can also operate the menus using the

buttons on the front panel of the TV.

D0105-EN

PICTURE

D1105-EN

PICTURE

Chosen

menu name

Chosen

PICTURE menu

Choose to set the screen

settings.

SOUND menu

Choose to set the sound settings.

FEATURES menu

Choose to set the sleep timer

and child lock settings.

SET UP menu

Choose to edit the channels or

set the display language

settings.

D0106

D0107

D0108

D0109

buttons

TV/AV button

MENU/OK button

LT-32&26A61BUSU_Eng.book Page 24 Tuesday, October 11, 2005 6:07 PM

Summary of Contents for InteriArt LT-26A61BU















































































































































































Search results

Summary of Contents for InteriArt LT-26A61BU

Reviews:

Related manuals for InteriArt LT-26A61BU

Brands by name

Popular brands

JVC InteriArt LT-26A61BU, Service Manual

Search results

Summary of Contents for InteriArt LT-26A61BU

Reviews:

Related manuals for InteriArt LT-26A61BU

Brands by name

Popular brands