JVC InteriArt HV-28D40BK Instructions Manual Download

Page: 36 / 60

HV-32/28D40BK / LCT1596-001A-U / ENGLISH

SET UP menu

• AUTO PROGRAM, EDIT/MANUAL,

PICTURE TILT and DECODER (EXT-2)

cannot be chosen when watching Digital
terrestrial broadcasting (DVB-T).

AUTO PROGRAM (Analogue)

You can again perform the AUTO
PROGRAM function TV channel automatic
registration which was performed in the

“Initial settings” (page 8).
To receive SKY 1 you need a satellite tuner.
You must have the satellite tuner set to SKY

1 before starting the AUTO PROGRAM
function.

1 Choose AUTO PROGRAM, then

press the

button

The AUTO PROGRAM menu appears
and received TV channels are

automatically stored in the programme
numbers (PR).

2 Perform any extra operations you

need to perform in step 3

(operations after AUTO PROGRAM

ends) and step 4 of “Initial

settings”

EDIT/MANUAL (Analogue)

The EDIT/MANUAL functions are divided
into two types:

• editing the current programme numbers

(PR) (EDIT functions); and

• manually storing a TV channel you want

to view on a particular programme
number (PR) (MANUAL function).

Here are the details about these functions:

MOVE:

This function changes the programme

number (PR) of a TV channel.

ID:

This function registers a channel name (ID)

to a TV channel.

INSERT:

This function adds a new TV channel in the

current programme numbers (PR) list by
using the CH number.

• You cannot use the INSERT function if

you do not know the channel number of a
TV channel. Use the MANUAL function

to register a TV channel in the programme
number (PR).

DELETE:

This function deletes a TV channel you do
not want to list.

MANUAL:

This function manually stores a new TV
channel in a programme number (PR).

Caution

• Using the MOVE, DELETE or INSERT

functions rewrites the current programme

numbers (PR) list. Therefore, the

programme numbers (PR) of some of the

TV channels will change.

• Using the MANUAL function for a TV

channel for which the CHILD LOCK

function has been set cancels the CHILD

LOCK function for that channel.

• Using the MANUAL function for a TV

channel for which the DECODER (EXT-2)

function has been set to ON returns the

setting of the DECODER (EXT-2) function

for that channel to OFF.

• When a TV channel has already been

registered in PR 99, using the INSERT

function deletes that TV channel.

D0029-EN

SET UP

AUTO PROGRAM
EDIT/MANUAL
PICTURE TILT
DECODER(EXT-2)
EXT SETTING
ATTENUATOR

OFF

HV-32&28D40BK_Eng.book Page 36 Wednesday, April 21, 2004 1:17 PM

Summary of Contents for InteriArt HV-28D40BK





























































Search results

Summary of Contents for InteriArt HV-28D40BK

Reviews:

Related manuals for InteriArt HV-28D40BK

Brands by name

Popular brands

JVC InteriArt HV-28D40BK, Instructions Manual

Search results

Summary of Contents for InteriArt HV-28D40BK

Reviews:

Related manuals for InteriArt HV-28D40BK

Brands by name

Popular brands