JVC InteriArt HV-28D40BK Instructions Manual Download

Page: 33 / 60

HV-32/28D40BK / LCT1596-001A-U / ENGLISH

SOUND menu

• Functions in the “SOUND” menu other

than “HEADPHONE VOLUME” work

for the TV speakers. They do not work for

the sound from the headphones.

• When the headphones are connected and

only one screen is displayed, only

“HEADPHONE VOLUME” can be used.

• STEREO / I • II cannot be chosen when

watching Digital terrestrial broadcasting

(DVB-T).

STEREO / I • II

When you are viewing a bilingual broadcast

programme, you can choose the sound from

Bilingual I (Sub I) or Bilingual II (Sub II). If

you have poor reception on a stereo

broadcast, you can change from stereo to

mono sound so that you can hear the

broadcast more clearly and easily.

• The sound mode you can choose differs

depending on the TV programme.

• This function does not work in the EXT

modes.

BASS

You can adjust the low tone of the sound.

: weaker

: strong

TREBLE

You can adjust the high tone of the sound.

: weaker

: strong

BALANCE

You can adjust the volume balance between
the left and right speaker.

: turn the left speaker’s volume level up.

: turn the right speaker’s volume level up.

HEADPHONE VOLUME

Adjust the volume of the sub-picture sound
which is heard through the headphones when

set to 2-pictures multi.

: Reduce volume

: Increase volume

• When not set to 2-pictures multi, the

headphone volume is adjusted with the

(volume) buttons.

3D CINEMA SOUND

Press the

button to set the 3D CINEMA

SOUND effect when 3D CINEMA SOUND
is set to ON or MONO.

Choose 3D CINEMA SOUND. Then

press the

button to display

the sub-menu.

SURROUND

Adjust the surround effect.

You can choose HIGH, MID or LOW.
Choosing LOW will reduce the surround
effect and choosing HIGH will increase the

surround effect.

BASS BOOST

Adjust the bass sound.
You can choose HIGH, MID or LOW.
Choosing LOW will reduce the bass sound

and choosing HIGH will increase the bass
sound.

: Stereo sound

: mono sound

: Bilingual I (sub I)

: Bilingual II (sub II)

D0019-EN

STEREO/
BASS
TREBLE
BALANCE
HEADPHONE VOLUME
3D CINEMA SOUND

SOUND

D0111-EN

SURROUND
BASS BOOST

> 3D CINEMA SOUND

MID
MID

HV-32&28D40BK_Eng.book Page 33 Wednesday, April 21, 2004 1:17 PM

Summary of Contents for InteriArt HV-28D40BK





























































Search results

Summary of Contents for InteriArt HV-28D40BK

Reviews:

Related manuals for InteriArt HV-28D40BK

Brands by name

Popular brands

JVC InteriArt HV-28D40BK, Instructions Manual

Search results

Summary of Contents for InteriArt HV-28D40BK

Reviews:

Related manuals for InteriArt HV-28D40BK

Brands by name

Popular brands