JVC InteriArt HV-28D40BK Instructions Manual Download

Page: 29 / 60

HV-32/28D40BK / LCT1596-001A-U / ENGLISH

PICTURE menu

• While the PICTURE menu is displayed,

pressing the blue button will set the
CONTRAST, BRIGHT, SHARP,

COLOUR, HUE settings to their default
settings.

PICTURE MODE

You can choose one of three PICTURE
MODEs to adjust the picture settings
automatically.

BRIGHT:

Heightens contrast and sharpness.

STANDARD:

Standardizes picture adjustment.

SOFT:

Softens contrast and sharpness.

CONTRAST

You can adjust the picture contrast.

: lower

: higher

BRIGHT

You can adjust the picture brightness.

: darker

: brighter

SHARP

You can adjust the picture sharpness.

: softer

: sharper

COLOUR

You can adjust the picture colour.

: lighter

: deeper

HUE

You can adjust the picture tint.

: reddish

: greenish

• You can change the HUE setting (picture

hue) when the colour system is NTSC

3.58, or NTSC 4.43.

COLOUR TEMP.

You can select one of three COLOUR

TEMP. modes (three tones of white) to adjust
the white balance of the picture. Since white
is the colour which is used as a reference for

all the other colours, changing the COLOUR
TEMP. mode affects the appearance of all
the other colours on the screen.

COOL:

A bluish white. Using this mode when

watching bright pictures allows you to enjoy
a more vivid and bright picture.

NORMAL:

The normal white colour.

WARM:

A reddish white. Using this mode when
watching films allows you to enjoy colours

that are characteristic of films.

PICTURE MODE
CONTRAST
BRIGHT
SHARP
COLOUR
HUE
COLOUR TEMP.
FEATURES

COOL

STANDARD

PICTURE

D0014-EN

RESET

HV-32&28D40BK_Eng.book Page 29 Wednesday, April 21, 2004 1:17 PM

Summary of Contents for InteriArt HV-28D40BK





























































Search results

Summary of Contents for InteriArt HV-28D40BK

Reviews:

Related manuals for InteriArt HV-28D40BK

Brands by name

Popular brands

JVC InteriArt HV-28D40BK, Instructions Manual

Search results

Summary of Contents for InteriArt HV-28D40BK

Reviews:

Related manuals for InteriArt HV-28D40BK

Brands by name

Popular brands