Filename [XVS30EK_07S-VHS.fm]
Masterpage:Left+
24
Page 24
September 2, 2003 6:24 pm
OPERATIONS ON S-VHS DECK (cont.)
VIDEO Plus+
®
Timer
Programming
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your unit is able to recognize.
A
Select the S-VHS deck.
On the unit
Press
VCR/DVD
repeatedly so that the VCR indicator
lights up.
On the remote control
Press
VCR
so that the VCR indicator lights up.
B
Access the VIDEO Plus+ screen.
C
Enter the PlusCode number.
D
Access the VIDEO Plus+ Program screen.
●
If the number you entered is invalid, “ERROR” appears on the
TV screen. Press
&
and input a valid PlusCode number.
E
Set the tape speed.
Press
p
.
F
Set the PDC mode.
Press
PDC
(
number key “7”
) to select “ON” or “OFF”.
●
If “VPS/PDC ON” is displayed on the TV screen, “PDC” is set
to “ON”.
●
If “VPS/PDC OFF” is displayed on the TV screen, “PDC” is set
to “OFF”.
●
VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this unit.
Before performing the VIDEO Plus+ Timer
Programming:
●
Make sure that the unit’s built-in clock is set properly.
●
Insert a cassette with the safety tab in place. The unit will
come on automatically.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/VCR/DVD
switch to the right.
Press
PROG
.
Press the
number keys
to
enter the PlusCode number
of a programme you wish to
record.
●
If you make a mistake, press
&
and input the correct number.
Press
OK
, then the VIDEO
Plus+ Program screen
appears (if you’re just starting
out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, or “TV PROG” shows “– –”, press
PR +/–
to
input the channel position number on which your unit
receives the station, then press
OK
or
e
.
XVS30EK_07S-VHS.fm Page 24 Tuesday, September 2, 2003 6:24 PM
