JVC GZ-RX621 Page 30 Detailed User Manual Download

Page: 30 / 179

Adjusting Brightness

You can adjust the brightness to your preferred level.

Select the Manual recording mode.

≪

PLAY

If the mode is

Intelligent Auto, tap

on the recording screen

to display the mode switching screen.

Tap

to switch the recording mode to Manual.

intelligent AUTO

MANUAL

Tap “MENU”.

REC

≪

PLAY

MENU

The top menu appears.

Tap “RECORD SETTING”.

OFF

SETUP

TOP MENU

Wi-Fi

SETTING

RECORD

SETTINGS

CONNECTION

Tap “BRIGHTNESS ADJUST”.

RECORD SETTING

Tap

to exit the menu.

Tap

to return to the previous screen.

Tap “MANUAL”.

MANUAL

AUTO

BRIGHTNESS ADJUST

Adjust the brightness value.

≪

PLAY

REC

MENU

SET

Compensation range: -2.0 to +2.0

Tap

to increase the brightness.

Tap

to decrease the brightness.

Tap “SET” to confirm.

≪

PLAY

REC

MENU

Memo :

Settings can be adjusted separately for videos and still images.

Recording

Summary of Contents for GZ-RX621




















































































































































































Search results

Summary of Contents for GZ-RX621

Reviews:

Related manuals for GZ-RX621

Brands by name

Popular brands

JVC GZ-RX621, Detailed User Manual

Search results

Summary of Contents for GZ-RX621

Reviews:

Related manuals for GZ-RX621

Brands by name

Popular brands