JVC GZ-RX110, Detailed User Manual

Page: 42 / 164

Memo :
0
When “TOUCH PRIORITY AE/AF” is set, “FOCUS” will be set to “AUTO”
automatically.
0 Tap the selected position (face/color/area) again to cancel the setting.
(Setting remains for registered faces.)
0 Tap on an unselected position (face/color/area) to reset.
0
If the camera loses track of a subject, tap the subject again.
0 Settings are canceled when zoom operation is performed. (“AREA
SELECT” only)
0 When “COLOR TRACKING” is set, the targeted subject (color) may
change if similar colors are detected. In this case, tap the subject again.
The targeted subject (color) may also be tracked back again if it appears
in the center of the screen within a specific time.
Caution :
0 Subjects near the sides of the LCD monitor may not respond or be
recognized when tapped. In this case, move the subject to the center and
tap again.
0 “FACE TRACKING” may not work properly depending on the shooting
conditions (distance, angle, brightness, etc.) and the subject (direction of
face, etc.). It is also particularly difficult to detect faces in backlight.
0
“COLOR TRACKING” may not function properly in the following cases:
- when recording subjects with no contrast
- when recording subjects that are moving at high speed
- when recording in a dark place
- when the surrounding brightness changes
0
“AREA SELECT” is not available while the digital zoom is in use.
Reducing Camera Shake
When the image stabilizer is set, camera shake during video recording can
be effectively reduced.
1
Tap “MENU”.
.
2
Tap “RECORD SETTING”.
.
3
Tap “OIS”.
.
0 If the icon is not displayed on the screen, tap “
1
” to scroll the screen.
0
Tap
L
to exit the menu.
0
Tap
J
to return to the previous screen.
4
Tap the desired setting.
.
Setting Details
b
OFF Deactivates image stabilizer.
a
ON Reduces camera shake under normal
shooting conditions.
r
ON (AIS) Reduces camera shake more effectively
when shooting bright scenes on the wide
angle end.
Only on the wide angle end (approx. 5x).
Memo :
0 It is recommended to set the image stabilizer to “OFF” when shooting a
subject of little movement with the unit on a tripod.
0
Complete stabilization may not be possible if camera shake is excessive.
0 This setting is effective for video recording only.
0 Using the image stabilizer will narrow the angle of view.
Recording
42