JVC GZ-MS130AA, Instructions Manual

Page: 15 / 44

EN15
GETTING ST
AR
TED
Charging the Battery Pack
1
Close the LCD monitor to turn off the
camcorder.
2
Attach the battery pack, then
connect the AC adapter.
•
With the “
v v
” (arrow) on the battery pack
pointing at the correct direction, slide the
battery pack until it locks in place.
DC
•
Connect the power cord to the AC adapter,
and plug the power cord into an AC outlet.
•
The power/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
finished.
L
To check the remaining battery power
See page 21.
L
Required charging/recording time
(approx.)
*When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
Battery pack Charging time Recording time
BN-VF808U
(Provided)
1 hr. 50 min. 2 hr. 45 min.*
BN-VF815U 2 hr. 40 min. 5 hr. 25 min.*
BN-VF823U 3 hr. 40 min. 8 hr. 10 min.*
L
To detach the battery pack
NOTE
•
You can also use the camcorder with just
the AC adapter.
•
The actual recording time may shorten
depending on the recording environment,
such as when recording scenes with fast
moving subject.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
Necessary Settings before Use
DC Jack
AC Adapter
To AC Outlet
(110V to 240V)
v v
Arrow
BATT.
GZ-MS130BAA_AA_IB_ENB.indb 15 GZ-MS130BAA_AA_IB_ENB.indb 15 3/19/2009 9:30:52 AM 3/19/2009 9:30:52 AM