JVC GZ-MG67E Instructions Manual Download Page 66

Page: 66 / 72

Warning Indications (Continued)

Before cleaning, turn off the camera and remove the battery pack and AC adapter.

To clean the exterior

Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild soap
and wring it out well before wiping. Then wipe again with a dry cloth.

To clean the LCD monitor

Wipe gently with a soft cloth. Be careful not to damage the monitor.

To clean the lens

Wipe gently with lens cleaning paper.

Indication

Meaning

墌

RECORDING FAILURE

●

Performance of recording medium is poor. Use the
Cleanup function [CLEAN UP] in the menu.

●

The writing speed of recording medium is slow, or the
recording medium is corrupted. Use an SD card that is
guaranteed to operate.

●

The recording medium was subjected to vibrations or jolts.
Be careful not to subject the recording medium to
vibrations or jolts.

●

Appears when the built-in hard disk is full and recording is
not possible. Delete unnecessary files.

●

Appears when the SD card is full and recording is not
possible.
Replace with new recording medium or delete
unnecessary files.

–

RECORDING MAY NOT BE
CORRECT ON THE MEMORY
CARD

●

The data may not be recorded on the recording medium
correctly. Try recording again.

●

Otherwise, clean up the recording medium.

–

MEMORY CARD CANNOT BE
PLAYED BACK CORRECTLY

●

The recording medium cannot be played back correctly. Try
playback again.

–

CANNOT USE IN VIDEO MODE

●

The operation is not available in the video mode.

–

DROP DETECTION WORKED
AND THE POWER IS TURNED
OFF

●

The drop detection function operated, and the power was
turned off. The file that was being recorded may have been
saved into the [EXTMOV] folder.

31
55

Cleaning the Camera

NOTES:

●

Avoid using strong cleaning agents such as benzine or alcohol.

●

Cleaning should be done only after the battery pack has been removed or other power units have been
disconnected.

●

Mould may form if the lens is left dirty.

●

When using a cleaner or chemically treated cloth, refer to the cautions for each product.

M6E6PAL.book Page 66 Tuesday, June 13, 2006 11:34 AM

Summary of Contents for GZ-MG67E









































































Search results

Summary of Contents for GZ-MG67E

Reviews:

Related manuals for GZ-MG67E

Brands by name

Popular brands

JVC GZ-MG67E, Instructions Manual

Search results

Summary of Contents for GZ-MG67E

Reviews:

Related manuals for GZ-MG67E

Brands by name

Popular brands