JVC GZ-MG20US - Everio Camcorder - 680 KP Software Manual Download Page 31

Page: 31 / 36

– 31 –

MasterPage: Body

Before loading or unloading recording medium or
turning off the PC, first disconnect the USB cable
and turn off the camera.

Drop the recording medium

icon on the desktop into the
[Trash] icon.

●

If the confirmation message
appears, click [OK].

Confirm that the ACCESS lamp

on the camera does not light or
blink.

●

If the ACCESS lamp lights or blinks,
wait until it is turned off before
proceeding.

Disconnect the USB cable.

Set the camera’s power switch to off.

The camera turns off.

This manual only refers to software installation
and PC connection. For more details of the
software, refer to its Help/Readme.

Capty MPEG Edit EX

Open the [Capty MPEG Edit EX for Everio]

folder in the [Applications] folder.

Double-click the [Capty MPEG Edit EX for

Everio] icon.

* You can drug and drop the selected video files into

the icon.

Help

Select [Capty MPEG Edit EX Help] in the help
menu. The usage is described.

ReadMe

The file is in the [ReadMe] folder. Support
information and the limit are mentioned.

Disconnecting the USB cable
(Macintosh)

Help/Readme (Macintosh)

INFORMATION

For the exclusive URL for Everio, refer to PIXELA
web site: http://www.pixela.co.jp/oem/jvc/e/
index.html

M5E3_InstallGuide.book Page 31 Tuesday, August 9, 2005 3:18 PM

Summary of Contents for GZ-MG20US - Everio Camcorder - 680 KP





































Search results

Summary of Contents for GZ-MG20US - Everio Camcorder - 680 KP

Reviews:

Related manuals for GZ-MG20US - Everio Camcorder - 680 KP

Brands by name

Popular brands

JVC GZ-MG20US - Everio Camcorder - 680 KP, Software Manual

Search results

Summary of Contents for GZ-MG20US - Everio Camcorder - 680 KP

Reviews:

Related manuals for GZ-MG20US - Everio Camcorder - 680 KP

Brands by name

Popular brands