JVC GY-HMQ10E, Instructions Manual

Page: 29 / 72

Inserting an SDHC/SDXC Card
This camera recorder comes with four SDHC/SDXC card slots.
(Slots A, B, C, and D)
1
Set the [STANDBY/ON OFF] switch to [OFF].
2
Open the door.
0
Slide the [DOOR LOCK] lever to the right, and pull the door
toward you.
3
Insert an SDHC/SDXC card with the notched
corner first.
0
To record in the 4K2K mode, insert four SD cards into slots
A to D.
The four media icons light up when SD cards are inserted
into all the slots.
0
When recording in HD quality (1920 mode), insert an SD
card into slot A.
After an SD card is inserted, the media icon for slot A will
light up.
4
Close the door.
0
After closing the door, slide the [DOOR LOCK] lever to the
left, and make sure that the door does not open up by itself.
.
[DOOR LOCK] Lever
Door
Notched
Corner
Face label upward
Caution :
0
The memory card needs to be formatted in advance if it has not
been used for recording in the 4K2K mode before.
See “Formatting (Initializing) SDHC/SDXC Cards” (
A
p. 30).
0
When you insert the formatted cards, ensure that the
combination and sequence of the four cards are matching
correctly. If the combination or sequence is incorrect, cards
cannot be used.
In order not to forget, take notes on the combination and
sequence of the cards when formatted.
SDHC/SDXC cards to use
See “SDHC/SDXC Cards” (
A
p. 11).
Slot Display
The icon of the slot will appear blinking in the following cases.
0
When the card is write-protected
0
When the card in use does not support Class 6 or higher
0
When the card is faulty
0
When there is no card in the slot
When in the 4K2K mode, the four slot display icons will appear
blinking in the following cases.
0
When there is a slot with no card inserted
0
When the combination of the four cards is incorrect
0
When there is an unformatted card
Removing the SDHC/SDXC Card
1
Set the [STANDBY/ON OFF] switch to [OFF].
2
Open the door.
0
Slide the [DOOR LOCK] lever to the right, and pull the door
toward you.
3
Push the SDHC/SDXC card and remove it
from the slot.
4
Close the door.
0
After closing the door, slide the [DOOR LOCK] lever to the
left, and make sure that the door does not open up by itself.
Memo :
0
Do not touch the metal part of the SDHC/SDXC card when
inserting or removing the SDHC/SDXC card.
Write-Protect Switch on the SDHC/SDXC Card
A
Slide the write-protect switch upward to enable writing or
deleting.
B
Slide the write-protect switch downward to prevent writing
or deleting. (Recorded data in the card are protected.)
.
Write-Protect Switch
Write/Delete Enabled Write/Delete Disabled
Preparations
29