Attaching/Detaching the Lens Cap
0
Before shooting, detach the lens cap.
0
When this camera recorder is not in use, attach
the lens cap to protect the lens.
0
Pinch the tabs on both sides of the lens cap to
attach and detach the lens cap.
.
Caution :
0
Do not press against the lens cap with force.
Doing so may damage the lens or the cap.
Attaching/Detaching the Hood
Attaching the Hood
Align the markings on the camera recorder and
hood; turn the hood in the direction of the arrow
(clockwise) until it is locked.
.
Detaching the Hood
0
To detach the hood, turn the hood in the
direction opposite to attaching it
(counterclockwise).
.
Caution :
0
Remove the hood when attaching a filter,
teleconverter or wide converter to the front of the
lens.
Attaching the Tripod
Use the screw hole at the bottom of this camera
recorder.
(1/4×20UNC)
Use the screw hole that suits the tripod.
To prevent the camera recorder from falling off,
which may result in injuries or damages, read the
“INSTRUCTIONS” of the tripod to be used and
make sure that it is securely attached.
.
o
Bottom
Caution :
0
If the camera recorder exceeds the weight limit
of the tripod, do not mount it on the tripod.
0
Use the tripod on a stable surface.
0
To prevent the camera recorder from falling,
attach securely using the rotation prevention
hole.
0
Use screws with screw length 5 mm and below.
28
Settings and Adjustments Before Use
Pr
ep
ar
ati
ons
