JVC GY-HM170E Instructions Manual Download Page 59

Page: 59 / 212

Adjusting the Iris

Adjust the aperture of the lens iris according to the

brightness of the subject.

Iris Dial

Auto Iris (Automatic Adjustment) Mode

Press and hold the [FULL AUTO] button to

set Full Auto mode to off.

Press the [IRIS A/M] button to set to the

Auto Iris mode.

The iris is automatically adjusted according to

the brightness of the object.

The lens aperture value (F-number) is not

displayed in the Auto Iris mode.

Memo :

Pressing and holding the [FULL AUTO] button

to enter the Full Auto mode also activates the

Auto Iris mode. In this case, the Gain, Shutter

and White Balance also enter into Auto mode

forcibly.

The switching operation of the [IRIS A/M] button

is disabled in the Full Auto mode.

The iris open/close limit can be set in [Camera

Function]

[Auto Iris Limit (OPEN)]

[Auto Iris

Limit (CLOSE)] during Auto Iris.

(

P103 [ Auto Iris Limit (OPEN) ] )

(

P103 [ Auto Iris Limit (CLOSE) ] )

To set the target level (brighter/darker) of the

auto iris, you can press and hold the [AE

LEVEL] button on the side of the camera

recorder and then change the level using the

volume button.

The convergence speed of the auto iris can be

set in the menu.

(

P103 [ AE Speed ] )

Manual Iris (Manual Adjustment) Mode

The aperture value (F-number) of the lens can be

set manually.

Press and hold the [FULL AUTO] button to

set Full Auto mode to off.

Press the [IRIS A/M] button to set to the

Manual Iris mode.

The lens aperture value (F-number) is

displayed.

1/ 100

F1. 6

ND 1 /16

12 :34 : 56

Jan 24 , 2015

00: 00: 00.00

5 . 6f t

4030 20

P 15000K

Turn the iris dial to adjust the iris manually.

Iris adjustment can be assigned to the zoom

ring.

Set [Camera Function]

[Zoom Ring] to

“Iris”.

(

P104 [ Zoom Ring ] )

The open F-number of the aperture varies

according to the zoom position.

Wide [W] end

: F1.2

Tele [T] end

: F3.5

F-number

Description

Decrease

The subject appears brighter.

The focused range becomes

sharper, while the background is

blurred to produce a soft image.

Increase

The subject appears darker.

Background of image becomes

focused as well.

Memo :

If [One Push Iris] is assigned to the user button,

pressing the assigned user button while in the

Manual Iris mode activates the One-push Auto

Iris mode, and holding down the button activates

the Push Auto Iris mode.

In addition to the [Iris] function, the iris dial can

also be assigned with the [Shutter] or [AE

Level] function.

(

P104 [ Iris Dial ] )

Adjusting the Iris

Shooting

Summary of Contents for GY-HM170E





















































































































































































































Search results

Summary of Contents for GY-HM170E

Reviews:

Related manuals for GY-HM170E

Brands by name

Popular brands

JVC GY-HM170E, Instructions Manual

Search results

Summary of Contents for GY-HM170E

Reviews:

Related manuals for GY-HM170E

Brands by name

Popular brands