JVC GY-HM150U Instructions Manual Download Page 98

Page: 98 / 104

Others

Alarm displays on the LCD monitor and viewfinder screens, as well as the tally lamps are output as follows according to the alarm
status.

Memo :

●

This camera recorder makes use of a microcomputer. Noise interference from external sources may prevent it from functioning

properly. When this occurs, turn off and on the power of the camera recorder again.

Error Displays and Actions

Error Display

Status

Action

Status Screen

Menu Screen

Thumbnail Screen

INCORRECT MEDIA

[***]

Incorrect Media [***]

SDHC/SDXC card is not supported (a type
other than Class 6/10).
(***: A, B, A/B)

Insert an SDHC/SDXC card that is compliant
with Class 6/10.
(

●

An irrecoverable error is detected.

●

SDHC/SDXC card reading/writing error.
(Faulty SDHC/SDXC card)

(***: A, B, A/B)

Replace the SDHC/SDXC card with a new
one.

SDHC/SDXC card is not formatted using this
camera recorder.
(***: A, B, A/B)

Format the card using this camera recorder.
(

●

SDHC/SDXC card re

uires restoring.

●

Recording is not successfully completed.
(Temporary blackout/card removed)

(***: A, B, A/B)

Restore the card using this camera recorder.
(

●

The lens cover may be closed. (Only
checked during startup.)

Open the lens cover.

NO MEDIA

●

[REC] button is pressed when an SDHC/
SDXC card is not inserted.

●

No SDHC/SDXC card is found in the slot to
record to during the Backup Rec mode.

Insert an SDHC/SDXC card.
(

Page 20, 4

)

No Media

No SDHC/SDXC card is found in Media mode
or when the thumbnail screen is displayed.

Insert an SDHC/SDXC card. (

Page 20)

No Clips

No clips are found on the inserted SDHC/
SDXC card in Media mode or when the
thumbnail screen is displayed.

Insert an SDHC/SDXC card that contains
playable clips.
(

Page 20, 4

)

NO CLIP

No viewable clips are found on the card for
Clip Review.

Insert an SDHC/SDXC card that contains clips
that can be reviewed.
(

Page 20, 4

)

REC INHIBITED

[REC] button is pressed when the write-protect
switch of the SDHC/SDXC card is set.

Turn off the write-protect switch of the SDHC/
SDXC card, or insert a recordable SDHC/
SDXC card.
(

●

Card is removed while recording is in
progress.

●

Card is removed while formatting is in
progress.

●

Card is removed while restoring is in
progress.

●

Card is removed while adding the OK
mark.

●

Card is removed while writing a setup file.

●

Card is removed while deleting a clip.

(*: A, B)

Restore the card using this camera recorder.
(

Page 92)

GY-HM150U.book Page 94 Monday, September 5, 2011 1:48 AM

Summary of Contents for GY-HM150U









































































































Search results

Summary of Contents for GY-HM150U

Reviews:

Brands by name

Popular brands

JVC GY-HM150U, Instructions Manual

Search results

Summary of Contents for GY-HM150U

Reviews:

Brands by name

Popular brands