JVC GY-HD250U - 3-ccd Prohd Camcorder Page 54 Instructions Manual Download

Page: 54 / 117

PREPARATIONS FOR OPERATION

Screen Adjustment

LCD monitor direction, angle, screen brightness, etc. can be
adjusted.

Adjusting the Direction and Angle of the
LCD monitor

• With the LCD door in the open condition, rotate the LCD

door.

• It can be turned 180° in upward direction and 90° in down-

ward direction.
When turned 180° upward direction, the LCD monitor can
be viewed from the lens side (vertically inverted image).

Adjusting the LCD monitor

• PEAKING:

Adjusts the contour of the LCD monitor.

• LCD BRIGHT:

Adjusts the brightness of the LCD monitor.

Adjustments are made on the LCD/VF[2/4] menu screen.

See page 90.

• LCD MIRROR MODE:

Sets the LCD monitor to display mirrored images when
shooting facing the subject.

Adjustments are made on the LCD/VF[4/4] menu screen.

See page 92.

• LCD CONTRAST:

Adjusts the contrast of the LCD monitor.

• BLACK & WHITE:

Sets the LCD monitor and viewfinder to black and white
display.

Viewfinder Adjustment

Direction of the Viewfinder

Adjust the position and angle of the viewfinder.

Diopter Adjustment

Rotate the eyepiece focusing ring until the viewfinder screen
image is clearly visible.

Adjustment of the Viewfinder Screen

• PEAKING:

Adjusts the contour of the LCD monitor and the viewfinder
screen.

• VF BRIGHT:

Adjusts the brightness of the viewfinder screen.

Adjustments are made on the LCD/VF[4/4] menu screen.

See page 92.

• VF CONTRAST:

Adjusts the contrast of the viewfinder screen.

• BLACK & WHITE:

Sets the LCD monitor and viewfinder to black and white
display.

MEMO

The screen size of the viewfinder can be changed by
selecting the desired size with the ASPECT item on the
VIDEO FORMAT[1/2] menu screen (4:3 or 16:9).

CH-2

CH-1

AUDIO SELE

MANU

AUTO

LCD BRIGHT

DISPLAY

FREE

REGEN

GENE.

REC

CAM/VTR

PEAKING volume

LCD BRIGHT

button

LCD lock release lever

180° up

90° down

Eyepiece focusing ring

VF BRIGHT volume

Eyepiece

PEAKING volume

Sliding securing ring

Viewfinder mount base

e_hd250.book Page 50 Tuesday, October 24, 2006 3:11 PM

Summary of Contents for GY-HD250U - 3-ccd Prohd Camcorder






















































































































Search results

Summary of Contents for GY-HD250U - 3-ccd Prohd Camcorder

Reviews:

Related manuals for GY-HD250U - 3-ccd Prohd Camcorder

Brands by name

Popular brands

JVC GY-HD250U - 3-ccd Prohd Camcorder, Instructions Manual

Search results

Summary of Contents for GY-HD250U - 3-ccd Prohd Camcorder

Reviews:

Related manuals for GY-HD250U - 3-ccd Prohd Camcorder

Brands by name

Popular brands