JVC GR GR-DV4000 Instructions Manual Download

Page: 9 / 88

Master Page: Right-start

TIC DEMONSTRA

TION

Automatic Demonstration takes place when “DEMO
MODE” is set to “ON” (factory-preset).

䡲

Automatic Demonstration starts when there is no
operation for about 3 minutes after the Power
Switch is set to “

” or “

” and no cassette is in

the camcorder.

䡲

Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minute after that, the demonstration will
resume.

䡲

“DEMO MODE” remains “ON” even if the
camcorder power is turned off.

To cancel Automatic Demonstration

Set the Power Switch to “

” while pressing down

the Lock Button located on the switch.

Open the LCD monitor fully, or pull out the
viewfinder fully.

Press the

MENU

Wheel in. The Menu Screen

appears.

Rotate the

MENU

Wheel to select “

”, and

press it. The SYSTEM Menu appears.

Rotate the

MENU

Wheel to select “DEMO

MODE”, and press it. The Sub Menu appears.

Rotate the

MENU

Wheel to select “OFF”, and

press it.

Rotate the

MENU

Wheel to select “

RETURN”,

and press it twice. The normal screen appears.

NOTE:

Detach the lens cap to see the actual changes of the
Automatic Demonstration activated on the LCD
monitor or viewfinder.

Automatic Demonstration

–

DE O

OFF

Power Switch

Lock Button

MENU Wheel

Sub Menu

GR-DV4000PAL.book Page 9 Friday, February 14, 2003 10:30 PM

Summary of Contents for GR GR-DV4000
























































































Search results

Summary of Contents for GR GR-DV4000

Reviews:

Related manuals for GR GR-DV4000

Brands by name

Popular brands

JVC GR GR-DV4000, Instructions Manual

Search results

Summary of Contents for GR GR-DV4000

Reviews:

Related manuals for GR GR-DV4000

Brands by name

Popular brands