20
EN
Master Page: Left-Heading0
VIDEO PLAYBACK
1
Load a cassette. (
2
Set the
VIDEO/MEMORY
Switch to “VIDEO”.
3
Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
4
To start playback, press
4
/
9
.
5
To stop playback, press
8
.
●
During Stop mode, press
3
to rewind, or
5
to fast-forward the tape.
NOTES:
●
Clean the video heads using an optional dry
cleaning cassette when:
• No picture during playback.
• Blocks of noise appear during playback.
For details,
●
If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to “OFF”, then to “PLAY”.
●
The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
(
●
You can also view the playback picture on the
LCD monitor with it flipped over and pushed
against the camcorder body.
●
LCD monitor/viewfinder indications:
• When power is supplied from a battery: the
“
” battery indicator is displayed. (
• When power is supplied from an AC outlet: the
“
” battery indicator does not appear.
●
When a cable is connected to the AV connector,
the sound is not heard from the speaker.
To control the speaker volume…
Rotate the
MENU
Wheel towards “+” to turn up the
volume, or towards “–” to turn down the volume.
Still Playback
Pauses during video playback.
1)
Press
4
/
9
during playback.
2)
To resume normal playback, press
4
/
9
again.
●
If still playback continues for more than about
3 minutes, the camcorder’s Stop mode is
automatically engaged.
●
When
4
/
9
is pressed, the image may not
pause immediately while the camcorder
stabilises the still image.
Normal Playback
Speaker
Play/Pause Button (
4
/
9
)
Lock Button
Rewind Button (
3
)
VIDEO/MEMORY Switch
Power Switch
Stop Button (
8
)
MENU Wheel (VOLUME)
Fast-Forward Button (
5
)
GR-DV4000PAL.book Page 20 Friday, February 14, 2003 10:30 PM
