JVC GR-DVP8 Instructions Manual Download

Page: 63 / 84

Master Page: Right

This camcorder can be used as a WebCam via USB
connection.

When connecting the cable, open the cover.

Make sure all necessary software (provided) are
installed in your PC and all units are turned off.

Connect the camcorder to your PC using the USB
cable.

Set the

VIDEO/MEMORY

Switch to “MEMORY”.

Set the Power Switch to “

” or “

” while

pressing down the Lock Button located on the
switch.

Turn on the PC.

●

“

”

appears on the screen.

●

If the PC is not powered on, the camcorder
does not enter the Web Camera mode.

When finished, turn off the PC first, then the
camcorder. Disconnect the USB cable from the
camcorder and PC.

NOTES:

●

It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (

墌

pg. 11)

●

Use the provided software PIXELA ImageMixer to
capture video in real time.

●

You can also use the camcorder for web
conference by using Microsoft Windows

NetMeeting

and signing up for MSN Hotmail.

●

In the Web Camera mode, the following buttons
cannot be operated:

E-MAIL

SNAPSHOT

INDEX/

NAVI

NAVI STORE

D.SOUND

, the Recording

Start/Stop Button.

Using The Camcorder As A
WebCam

To USB

connector

USB cable

(provided)

USB-equipped PC

Connector Cover*

Refer to the instruction manuals of the PC and
provided Software.

NCED FE

TURE

GR-DVP9US.book Page 63 Wednesday, January 22, 2003 5:35 PM

Summary of Contents for GR-DVP8




















































































Search results

Summary of Contents for GR-DVP8

Reviews:

Related manuals for GR-DVP8

Brands by name

Popular brands

JVC GR-DVP8, Instructions Manual

Search results

Summary of Contents for GR-DVP8

Reviews:

Related manuals for GR-DVP8

Brands by name

Popular brands