background image

56

 

EN

Master Page: Left

The audio track can be customised only when 
recorded in the 12-bit and SP modes. (

pg. 34)

1

Play back the tape to locate the point where 
editing will start, then press 

PAUSE

 (

9

).

2

While holding 

A. DUB

 (

D

) on the remote 

control, press 

PAUSE

 (

9

). The “

9

D

” and “MIC” 

indicators appear.

3

Press 

PLAY

 (

U

), then begin “narrating”. Speak 

into the microphone.

To pause dubbing, press 

PAUSE

 (

9

).

4

To end Audio Dubbing, press 

PAUSE

 (

9

), then 

STOP

 (

8

).

To hear the sound during Audio Dubbing...

Connect optional headphones to the headphone 
connector or use the S/AV connector, and set the 
“12bit MODE” to the desired mode;
• “SOUND 1” for the playback sound.
• “SOUND 2” for the dubbed sound.
• “MIX” for the playback and dubbed sound.

To hear the dubbed sound during playback…

Set “12bit MODE” to “SOUND 2” or “MIX”. 
(

pg. 31, 40)

NOTES:

When editing onto a tape that was recorded at 
12-bit, the old and new soundtracks are recorded 
separately.

If you dub onto a blank space on the tape, the 
sound may be disrupted. Make sure you only edit 
recorded areas.

If feedback or howling occurs during TV playback, 
move the camcorder’s microphone away from the 
TV, or turn down the TV’s volume.

If you change from 12-bit to 16-bit in mid-
recording and then use the tape for Audio 
Dubbing, it is not effective from the point where 
16-bit recording began.

During Audio Dubbing, when the tape moves to 
scenes recorded in the LP mode, scenes recorded 
in 16-bit audio or a blank portion, Audio Dubbing 
stops.

To perform Audio Dubbing while watching on the 
television, make connections. (

pg. 22)

To perform Audio Dubbing with a video unit 
connected to the camcorder’s S/AV connector, first 
set “S/AV INPUT” to “A/V.IN” in VIDEO Menu. 
(

pg. 31, 40) 

The “AUX” indication appears instead of “MIC”. 

Audio Dubbing

PAUSE

PLAY

A.DUB

STOP

Headphone

Connector

Speaker

Stereo Microphone

Audio Dubbing Using Digital 
Sound Effects

PAUSE

PLAY

A.DUB

STOP

D.SOUND Button/Stop 

(

8

) Button

MENU Button

SET/SELECT

Button

+, – Button

INDEX

Button

USING THE REMOTE CONTROL UNIT (cont.)

GR-DVP9US.book  Page 56  Wednesday, January 22, 2003  5:35 PM

Summary of Contents for GR-DVP8





















































































Reviews: