30
EN
Master Page: Left
To Print By Selecting Still Images And Number
Of Prints
1
Perform steps
1
–
8
2
Press
+
or
–
to select
“CURRENT”, and press
SET/SELECT
. The DPOF
screen appears.
3
Turn the
SHUTTLE
SEARCH
Ring to the left
(
3
) or to the right (
5
)
to select the desired file.
4
Press
+
or
–
to select the number indication (00),
and press
SET/SELECT
.
5
Select the number of prints
by pressing
+
to increase
the number, or
–
to
decrease the number, and
press
SET/SELECT
.
●
Repeat steps
3
through
5
for the desired number
of prints.
●
The number of prints can be set up to 15.
●
To correct the number of prints, select the
image again and change the number.
6
Press
+
or
–
to select
“RETURN”, and press
SET/
SELECT
. The “SAVE?”
appears.
●
If you did not change
any settings in step
3
through
5
, the Menu
Screen reappears.
7
Press
+
or
–
to select “EXECUTE” to save the
setting you have just made, and press
SET/
SELECT
.
●
To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps
1
–
8
2
Press
+
or
–
to select “RESET”, and press
SET/
SELECT
. The DPOF screen appears.
3
Press
+
or
–
to select “EXECUTE”, and press
SET/
SELECT
. The normal playback screen appears.
●
To cancel selection, select “RETURN”.
●
The number of prints is reset to 0 for all still
images.
You can initialize a memory card anytime.
After initializing, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1
Set the
VIDEO/MEMORY
Switch to “MEMORY”.
2
Set the Power Switch to “
P
” while pressing
down the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Press
MENU
. The Menu
Screen appears.
5
Press
+
or
–
to select
“FORMAT”, and press
SET/SELECT
. The FORMAT
screen appears.
6
Press
+
or
–
to select
“EXECUTE”, and press
SET/SELECT
. The memory
card is initialized.
●
When initialization is finished, “NO IMAGES
STORED”, “NO E-MAIL CLIP STORED” or
“NO SOUND STORED” appears.
●
To cancel initialization, select “RETURN”.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
RETURN
SHEETS
DPOF
0 0
SHEETS
DPOF
0 5
DPOF
EXECUTE
SAVE?
CANCEL
Initializing A Memory Card
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialization.
Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may be
corrupted if the battery becomes exhausted during
initialization. If the memory card becomes
corrupted initialize it.
MENU
D I SPLAY
END
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
ORMAT
F
EXECUTE
DATA?
EX I ST I NG
ERASE AL L
RETURN
GR-DVP9US.book Page 30 Wednesday, January 22, 2003 5:35 PM
