MasterPage: Heading0_Left
36
EN
FEATURES FOR RECORDING
LED Light can be used to
brighten the subject in the dark
place during video recording or
D.S.C. shooting.
1
Press
LIGHT
repeatedly to
change the setting.
OFF
: Turns off the light.
ON
: The light is on always. (
appears.)
AUTO
: The light turns on automatically when
dark. (
appears.)
2
Press the Recording Start/Stop Button to
start video recording or
SNAPSHOT
to shoot a
still image.
NOTES:
●
Be careful not to point the LED Light directly to
eyes.
●
If the light does not reach the subject when the
LED Light setting is “ON”, the Night-Scope
function will be activated, and makes it possible to
shoot the subject brighter.
●
There is a difference in the brightness of the
images shot between the centre area which is
illuminated by the LED Light and the surrounding
areas (which will be darker).
●
Since subjects are shot at a reduced shutter
speed when the LED Light setting is “ON”, they
will appear slightly blurred.
This feature is useful for recording or playing
back precious or hard-to-see moments at a slow
speed. Sound is recorded and played back in
real time.
1
Set the
VIDEO/MEMORY
Switch to “VIDEO”.
2
Set the recording mode to “
M
”
.
3
Select “
”and set “SNAP/SLOW” to
“SLOW”. (
pg. 32, 33) The Live Slow indicator
“
” appears.
4
Press
SNAPSHOT (SLOW)
during recording
or playback.
●
The moving pictures are divided into four
frames. They are recorded or played back for
1.5 seconds, and then normal recording or
playback resumes
●
This feature is effective when the recording
mode selection is set to both
“
A
”
or “
M
”
.
NOTE:
Available only when the
VIDEO/MEMORY
Switch is
set to“VIDEO”
This camcorder allows you to choose the type of
image output format for recording.
[ ]
= Factory-preset
1
Set the Power Switch to
“REC”
.
2
Press
16:9
button repeatedly to choose your
selection.
[4:3]
: Records with no change in the screen
ratio. For playback on a TV with a normal screen
ratio. When using this mode on a TV with a
normal screen ratio, refer to your TV’s instruction
manual.
16:9
:
For playback on TVs with an aspect ratio of
16:9. Naturally expands the image to fit the
screen without distortion. The 16:9 indicator
appears. When using this mode, refer to your
wide-screen TV’s instruction manual. During
playback/recording on 4:3 TVs/LCD monitor/
viewfinder, select “4:3TV” in “16:9”
(
pg. 34, 35) to prevent vertical elongated
image.
NOTES:
●
Available only when the
VIDEO/MEMORY
Switch is set to
“VIDEO”.
●
Still images are recorded at 4:3 mode. They
cannot be recorded at 16:9 mode.
LED Light
Live Slow
LED Light
Wide Mode
16 : 9
4 : 3
GR-D650E-640E.book Page 36 Tuesday, May 30, 2006 11:31 AM