JVC GR-D390AS, Manual

Page: 25 / 112

EN
25
VIDEO PLAYBACK
MasterPage: Start_Right
VIDEO RECORDING & PLA
YBACK
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(
pg. 26)
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
1
Pull out the battery
holder by pushing the lock
tab.
2
Insert the battery in the
holder, and be sure to
have the “+” mark visible.
3
Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it
at the remote sensor. The
transmitted beam’s
approximate effective
distance for indoor use is
5 m.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
1
Infrared beam transmitting window
●
Transmits the beam signal.
The following buttons are available only when
the camcorder’s Power Switch is set to “PLAY”.
2
PAUSE Button
●
Pauses the tape ( pg. 26)
Up Button ( pg. 26)
3
SLOW Rewind Button ( pg. 26)
4
REW Button
●
Rewind/Reverse Shuttle Search on a tape
(
pg. 23)
●
Displays previous file in a memory card
(
pg. 28)
Left Button ( pg. 26)
5
INSERT Button ( pg. 46)
6
SHIFT Button ( pg. 26)
7
DISPLAY Button ( pg. 24, 43)
8
SLOW Forward Button ( pg. 26)
9
PLAY Button
●
Starts Playback of a tape ( pg. 23)
●
Starts Auto Playback of images in a memory
card (
pg. 28)
!
FF Button
●
Forward/Forward Shuttle Search on a tape
(
pg. 23)
●
Displays next file in a memory card ( pg. 28)
Right Button ( pg. 26)
"
A. DUB Button ( pg. 46)
#
STOP Button
●
Stops the tape ( pg. 23)
●
Stops Auto Playback ( pg. 28)
Down Button ( pg. 26)
$
EFFECT Button ( pg. 26)
%
EFFECT ON/OFF Button ( pg. 26)
The following buttons are available when the
camcorder’s Power Switch is set to “REC”.
&
Zoom (T/W) Buttons
Zoom in/out (
pg. 21, 26)
(Also available with the Power Switch set to
“PLAY”)
(
START/STOP Button
Functions the same as the Recording Start/
Stop Button on the camcorder.
)
S.SHOT Button
Functions the same as
SNAPSHOT on the
camcorder.
(Also available with the Power Switch set to
“PLAY”)
Playback Using The Remote
Control
1
1
2
3
Lock tab
Remote sensor
GR-D390AS_EN.book Page 25 Monday, May 15, 2006 6:41 PM