JVC GR-D32, Instructions Manual

Page: 17 / 40

MENUS FOR DETAILED ADJUSTMENT
ADV
A
N
C
ED
F
E
A
T
UR
ES
EN
17
MasterPage: Advan_Right
this mode, refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/LCD
monitor/viewfinder, the image is elongated vertically.
[OFF] : Disengages the function.
ON : Helps cut down on noise created by wind. The
“ ” indicator appears. The quality of the sound will
change. This is normal.
SYSTEM
The “
s
” functions which are set when the Power Switch
is set to “
M
” are also applied when the Power Switch is
set to “PLAY”.
[ ] = Factory-preset
OFF : Turns off sounds when performing any operations.
It also deactivates the shutter sound effect, however the
shutter sound is recorded onto the tape during Snapshot
for Video Recording (
墌
pg. 21).
BEEP : The beep sounds when the power is turned on or
off, and at the beginning and end of recording. It also
activates the shutter sound effect. (
墌
pg. 21)
[MELODY] : Instead of a beep, a melody sounds when
any operation is performed. It also activates the shutter
sound effect. (
墌
pg. 21)
OFF : Automatic demonstration will not take place.
[ON] : Demonstrates certain functions such as Program
AE with special effects, etc., and can be used to confirm
how these functions operate. Demonstration starts in the
following cases:
●
When the Menu Screen is closed after “DEMO MODE” is
turned “ON”.
●
With “DEMO MODE” set to “ON”, if there is no operation for
about 3 minutes after the Power Switch is set to “
A
” or “
M
”.
Performing any operation during the demonstration stops
the demonstration temporarily. If no operation is
performed for more than 3 minutes after that, the
demonstration will resume.
NOTES:
●
If a cassette is in the camcorder, the demonstration cannot
be turned on.
●
“DEMO MODE” remains “ON” even if the camcorder power
is turned off.
●
If “DEMO MODE” remains “ON”, some functions will not be
available. After viewing demo, set to “OFF”.
[LCD] : The image is displayed on the LCD monitor when
the viewfinder is pulled out while the LCD monitor is
opened.
FINDER : The image is displayed in the viewfinder when
the viewfinder is pulled out while the LCD monitor is
opened.
EXECUTE : Resets all settings to the factory-preset.
RETURN : Does not reset all settings to the factory-
preset.
CAMERA DISPLAY
●
The “
n
” (CAMERA DISPLAY) settings are effective even
when the Power Switch is set to “
A
”. However, the menu
settings can be changed only when the Power Switch is set
to “
M
”.
●
The “
n
” (CAMERA DISPLAY) settings are effective only
for shooting except “BRIGHT”.
[ ] = Factory-preset
墌
pg. 9, “Brightness Adjustment Of The Display”
LCD : Keeps the camcorder’s display (except the date,
time and time code) from appearing on the connected TV
screen.
[LCD/TV] : Makes the camcorder’s display appear on
screen when the camcorder is connected to a TV.
OFF : The date/time does not appear.
[AUTO] : Displays the date/time for approx. 5 seconds
when the Power Switch is set from “OFF” to “
A
” or “
M
”.
ON : The date/time is always displayed.
[OFF] : Time code is not displayed.
ON : Time code is displayed on the camcorder and on the
connected TV. Frame numbers are not displayed during
recording. (
墌
pg. 12)
墌
pg. 8, “Date/Time Settings”
WIND CUT
BEEP
DEMO MODE
PRIORITY
CAM RESET
BRIGHT
ON SCREEN
DATE/TIME
TIME CODE
CLOCK ADJ.
GR-D32US.book Page 17 Friday, November 21, 2003 9:31 AM