JVC GR-D201, Instructions Manual

Page: 37 / 88

EN EN EN EN
!%
!% !%
!%
Master Page: Right
Wide mode
WIDE MODE (Factory-preset: OFF )
OFF : Records with no change in the screen ratio.
For playback on a TV with a normal screen ratio.
CINEMA * : Inserts black bands at the top and
bottom of the screen. The indicator appears.
During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are cut
and the screen ratio becomes 16:9. When using
this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording on
4:3 TVs/LCD monitor/viewfinder, black bands are
inserted at the top and bottom of the screen and
the image appears like a letter boxed 16:9 movie.
SQUEEZE * : For playback on TVs with an
aspect ratio of 16:9. Naturally expands the image
to fit the screen without distortion. The
indicator appears. When using this mode, refer to
your wide-screen TV’s instruction manual. During
playback/recording on 4:3 TVs/LCD monitor/
viewfinder, the image is elongated vertically.
D.WIDE * : The indicator appears. The
zoom range is extended beyond the maximum
optical zoom wide angle range. This mode’s wide
angle setting is equivalent to using a 0.7X wide
conversion lens. Zooming is possible from 0.7X to
10X. This mode is suitable for shooting in a small
room.
* Available only when the VIDEO/MEMORY
Switch is set to “VIDEO”.
Wind cut
WIND CUT (Factory-preset: OFF )
OFF : Disengages the function.
ON : Helps cut down on noise created by
wind. The “ ” indicator appears. The quality of
the sound will change. This is normal.
Snapshot flash
FLASH (Factory-preset: AUTO )
OFF : Will not fire.
AUTO : Fires automatically if it is dark (
appears).
AUTO C : Fires automatically if it is dark (
appears) and reduces the Red-Eye effect in the
subject’s eyes.
ON : Always fires.
For details, refer to “Snapshot Flash” (
墌
pg. 43).
Flash brightness adjustment
FLASH ADJ. (Factory-preset: ±0 )
For details, refer to “Flash Brightness Adjustment”
(
墌
pg. 43).
SYSTEM
Beep, melody and shutter sound
BEEP (Factory-preset: MELODY )
OFF : Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP : The beep sounds when the power is turned
on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (
墌
pg. 23, 42)
MELODY : Instead of a beep, a melody sounds
when any operation is performed. It also activates
the shutter sound effect. (
墌
pg. 23, 42)
Tally lamp setting
TALLY (Factory-preset: ON )
OFF : The tally lamp remains off at all times.
ON : The tally lamp comes on to signal the start of
recording.
Remote control setting
For details, refer to “USING THE REMOTE
CONTROL UNIT” (
墌
pg. 56).
REMOTE (Factory-preset: ON )
OFF : Disables the remote control operations.
ON : Enables the remote control operations.
System Menu
AD
VA
NCED FE
AT
URE
S
CONTINUED ON NEXT PAGE
GR-D200US.book Page 37 Saturday, April 26, 2003 2:11 PM