JVC GR-D201, Instructions Manual

Page: 32 / 88

!
! !
!
EN EN EN EN
Master Page: Left-Heading0X2
MENUS FOR DETAILED ADJUSTMENT (cont.)
4) Press SELECT/SET . The Menu Screen returns.
●
Repeat the procedure if you wish to set other
function menus.
5) Press SELECT/SET again. The Menu Screen
closes.
NOTES:
●
The “
m
“ settings are effective when the Power
Switch is set to both “ A ” and “ M ”. However, the
menu settings can be changed only when the
Power Switch is set to “
M ”.
●
The “
q
” settings are effective only when the
Power Switch is set to “ M ”.
●
The “
s
” functions which are set when the Power
Switch is set to “ M ” are also applied when the
Power Switch is set to “PLAY”.
●
The “ n ” (CAMERA DISPLAY) settings are
effective even when the Power Switch is set to
“
A ”. However, the menu settings can be changed
only when the Power Switch is set to “
M
”.
●
The “ n ” (CAMERA DISPLAY) settings are
effective only for shooting.
●
The “ n ” (VIDEO DISPLAY) settings are effective
only for video playback.
●
The date indication can also be turned on/off by
pressing the
DISPLAY Button on the remote
control (provided). (
墌
pg. 22, 52, 62)
RECORDING MENUS
IMPORTANT:
Some Wipe/Fader Effects cannot be used with
certain modes of Program AE with special effects.
(
墌
pg. 33) If an unusable Wipe/Fader Effect is
selected, its indicator blinks in blue or goes out.
These effects let you make pro-style scene
transitions. Use them to spice up the transition from
one scene to the next.
Wipe or Fader works when video recording is
started or stopped.
1
Set the VIDEO/MEMORY Switch to “VIDEO”.
2
Set the Power Switch to “
M
” while pressing down
the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Set “
v
” to the desired mode. (
墌
pg. 31)
●
The selected effect indicator appears.
5
Press the Recording Start/Stop Button to activate
the Fade-in/out or Wipe-in/out.
To deactivate the selected effect…
Select “OFF” in step 4 .
NOTES:
●
You can select other effects for “WIPE/FADER”
during recording.
●
You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
WIPE/FADER
(Factory-preset: OFF )
OFF : Disables effects.
FADER–WHITE : Fade in or out with a white
screen.
FADER–BLACK : Fade in or out with a black
screen.
FADER–B.W : Fade in to a color screen from a
black and white screen, or fade out from color to
black and white.
Wipe Or Fader Effects
GR-D200US.book Page 32 Friday, April 11, 2003 1:05 PM