41
15
°
5m(16.4ft)
15
°
30
°
30
°
FEATURE:
Self-Timer, Animation and Time-Lapse
PURPOSE:
The remote control lets you set/release
Interval Timer and Rec Time functions as
well as the Menu screen.
OPERATION:
Self-Timer
1) Set
Instead of performing steps 1 through
3 on pg. 30 (“Self-Timer”), press INT.
TIME on the remote control. Each
time INT. TIME is pressed, the Interval
Timer indicator appears, changing in
the following order: 15s, 30s, 1min,
5min and No indication (off).
2) Release
Instead of setting “Interval Timer” to
“OFF” in the Menu, press INT. TIME
on the remote control until the
Interval Timer indicator disappears.
Animation
1) Set
Instead of performing steps 1 and 2
on pg. 31 (“Animation”), press REC
TIME on the remote control. Each
time REC TIME is pressed, the Rec
Time indicator appears, changing in
the following order: 1/4s, 1/2s, 1s, 5s
and No indication (off).
2) Release
Instead of using the Menu in step 5 on
pg. 31, press REC TIME on the remote
control until the Rec Time indicator
disappears.
Time-Lapse
1) Set
Instead of performing steps 1 through
3 on pg. 31 (“Time-Lapse”), press INT.
TIME and REC TIME on the remote
control. Each time INT. TIME is
pressed, the Interval Timer indicator
appears, changing in the following
order: 15s, 30s, 1min, 5min and No
indication (off). Each time REC TIME
is pressed, the Rec Time indicator
appears, changing in the following
order: 1/4s, 1/2s, 1s, 5s and No
indication (off).
2) Release
Instead of using the Menu in step 5 on
pg. 31, press INT. TIME and REC
TIME on the remote control until the
indicators disappear.
NOTE:
Also refer to pgs. 30 and 31.
FEATURE:
Index Code Marking
PURPOSE:
To give you automatic access to any
selected point on a recording.
OPERATION:
1) Press VISS once to place the index
code. “INDEX” blinks in the
viewfinder during marking.
NOTE:
If VISS is pressed during Record–
Standby mode, the mark is placed where
RECORDING START/STOP is pressed.
Transmitted beam
effective area
Remote sensor
When using the remote control, be sure to
point it at the remote sensor. The above
illustration shows the approximate transmitted
beam effective area for indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or
when the remote sensor is directly exposed to
sunlight or powerful lighting.
1min
INDEX
1/2s
REC TIME
INT. TIME
VISS
START/STOP
RM-V700U (optional)
Rec Time Indicator
Index Code
Marking
Viewfinder
Interval Timer Indicator
Summary of Contents for GR-AX96
Page 58: ...MEMO ...
Page 59: ...MEMO ...
