JVC Everio GZ-RX610 Page 52 Detailed User Manual Download

Page: 52 / 179

Checking the Remaining Recording Time

Display the remaining battery power and the remaining recording time.

Memo :

The remaining battery power and the remaining recording time are

estimates.

The remaining recording time is displayed only during video mode.

The remaining recording time is displayed for the recording media that is

currently selected.

Open the LCD monitor.

Check that the camera is set to the recording mode. If the camera is

in the playback mode, click

to switch to recording mode.

Tap “MENU”.

The top menu appears.

Tap

Display the remaining recording time.

The remaining recording time is displayed only in the video recording

mode.

The remaining recording time is displayed for the recording media

that is currently selected.

is displayed instead of the remaining battery power when the AC

adapter is connected.

To exit the display, tap

Recording

Summary of Contents for Everio GZ-RX610




















































































































































































Search results

Summary of Contents for Everio GZ-RX610

Reviews:

Related manuals for Everio GZ-RX610

Brands by name

Popular brands

JVC Everio GZ-RX610, Detailed User Manual

Search results

Summary of Contents for Everio GZ-RX610

Reviews:

Related manuals for Everio GZ-RX610

Brands by name

Popular brands