JVC Everio GZ-RX610 Page 167 Detailed User Manual Download

Page: 167 / 179

When the unit is not working properly

Resetting this Unit

Open the terminal cover.

Remove the power cord and all connecting cables.

Close the LCD monitor to turn off this unit.

Press the Reset button gently using an object with pointed tip.

Charging

Unable to charge the battery.

When the battery pack is fully charged, the lamp does not light up.

Be sure to charge using the supplied AC adapter. Malfunction in the unit that

occurred due to the use of an AC adapter other than the one provided is not

included in the warranty.

Check the connection, then disconnect and reconnect the charging adapter

cable.

Charging cannot be performed under low or high temperature environments.

Charge under the room temperature range of 10°C to 35°C. (Under

environments beyond the temperature range, charging may stop to protect

the battery pack.)

Using a non-original AC adapter may result in damage to this unit. Be sure

to use an original AC adapter.

Charging is not possible when the video recording mode with progressive

(50p) recording or Wi-Fi function is in used.

The remaining battery display is not correct.

If this unit is used for long periods of time in high or low temperatures, or if

the battery pack is repeatedly charged, the amount of remaining battery may

not be displayed correctly.

The battery runs out quickly even after charging.

Be sure to charge using the supplied AC adapter. Malfunction in the unit that

occurred due to the use of an AC adapter other than the one provided is not

included in the warranty.

The performance of the battery will drop temporarily when the temperature

is -10°C to 0°C, this will cause the remaining recording time to shorten.

When the recording time becomes extremely short even when the battery is

fully charged, the battery needs to be replaced. For details on replacing the

built-in battery (subject to a fee), consult the nearest JVC service center.

Troubleshooting

167

Summary of Contents for Everio GZ-RX610




















































































































































































Search results

Summary of Contents for Everio GZ-RX610

Reviews:

Related manuals for Everio GZ-RX610

Brands by name

Popular brands

JVC Everio GZ-RX610, Detailed User Manual

Search results

Summary of Contents for Everio GZ-RX610

Reviews:

Related manuals for Everio GZ-RX610

Brands by name

Popular brands