JVC Everio GZ-RX610 Page 12 Detailed User Manual Download

Page: 12 / 179

Adjusting the Touch Screen

Adjust the response position when the touch screen is touched.

Tap “MENU”.

Tap “SETUP”.

Tap “TOUCH SCREEN ADJUST”.

The touch screen adjustment screen appears.

Tap “+”. (3 times in total)

Keep tapping “+” as its position changes with every tap.

If areas other than the “+” mark are tapped, errors will occur. Make

sure to tap the “+” mark.

Tap “+” again to confirm the adjusted positions. (3 times in total)

Keep tapping “+” as its position changes with every tap.

Tap “OK”.

Setting ends and returns to the menu screen.

Caution :

Do not tap areas other than the “+” mark during touch screen adjustment

(steps 4 - 5). Doing so may cause the touch screen to malfunction.

Memo :

Adjust by lightly tapping with a corner of an SD card, etc.

Do not press with an object with a sharp tip or do not press hard.

Getting Started

Summary of Contents for Everio GZ-RX610




















































































































































































Search results

Summary of Contents for Everio GZ-RX610

Reviews:

Related manuals for Everio GZ-RX610

Brands by name

Popular brands

JVC Everio GZ-RX610, Detailed User Manual

Search results

Summary of Contents for Everio GZ-RX610

Reviews:

Related manuals for Everio GZ-RX610

Brands by name

Popular brands