Main Unit
0
For safety, DO NOT
…
open the camcorder’s chassis.
…
disassemble or modify the unit.
…
allow inflammables, water or metallic
objects to enter the unit.
…
disconnect the power supply while the
power is on.
…
place naked flame sources, such as
lighted candles, on the apparatus.
…
leave dust or metal objects adhered to the
power plug or an AC wall outlet.
…
insert any objects in the camcorder.
0
Avoid using the unit
…
in places subject to soot or steam such as
near a cooking stove.
…
in places subject to excessive shock or
vibration.
…
near a television set.
…
near appliances generating strong
magnetic or electric fields (speakers,
broadcasting antennas, etc.).
…
in places subject to extremely high (over
40 °C) or extremely low (under -10 °C)
temperatures.
0
DO NOT leave the unit
…
in places of over 50°C
…
in places where humidity is extremely low
(below 35 %) or extremely high (above 80
%) with the terminal cover open.
…
in direct sunlight.
…
in a closed car in summer.
…
near a heater.
…
in high places such as on a TV. Leaving the
unit in high places while a cable is
connected may result in a malfunction if the
cable is caught and the unit falls onto the
floor.
0
To protect the unit, DO NOT
…
drop the unit or strike it against hard
objects.
…
subject it to shock or excessive vibration
during transportation.
…
keep the lens directed at extremely bright
objects for long periods.
…
expose the lens to direct sunlight.
…
swing it excessively when using the hand
strap.
…
swing the soft camcorder case excessively
when the camcorder is inside it.
…
cover camcorder with a towel, cloth and so
on.
0
To prevent the unit from dropping
0
Fasten the grip belt securely.
0
When using the camcorder with a tripod,
attach the camcorder to the tripod
securely.
If the camcorder drops, you may be injured
and the camcorder may be damaged.
When a child uses the unit, there must be
parental guidance.
Power Consumption
0
2.2 W (GZ-R318)
The above are values when [MONITOR
BRIGHTNESS] is set to [3] (standard).
0
2.3 W (GZ-RX530)
The above are values when [LIGHT] is
set to [OFF], [MONITOR BRIGHTNESS]
is set to [3] (standard), and [SYSTEM
SELECT] is set to [50i].
0
Rated Current Consumption: 1A
EN
5
