background image

EN

Safety Precautions

IMPORTANT (for owners in the U.K.)
Connection to the mains supply in the United Kingdom.
DO NOT cut off the mains plug from this equipment.

If the plug fitted is not suitable for the power points in 
your home or the cable is too short to reach a power 
point, then obtain an appropriate safety approved 
extension lead or consult your dealer.

BE SURE to replace the fuse only with an 
identical approved type, as originally fitted, and 
to replace the fuse cover.

If nonetheless the mains plug is cut off be sure to 
remove the fuse and dispose of the plug immediately, 
to avoid possible shock hazard by inadvertent 
connection to the mains supply.
If this product is not supplied fitted with a mains plug 
then follow the instructions given below:

DO NOT

 make any connection to the Larger Terminal 

coded E or Green.
The wires in the mains lead are coloured in 
accordance with the following code:

If these colours do not correspond with the terminal 
identifications of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt — consult a competent electrician.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, 
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTIONS:

To prevent shock, do not open the cabinet. No 
user serviceable parts inside. Refer servicing to 
qualified personnel.

When you are not using the AC adapter for a long 
period of time, it is recommended that you 
disconnect the power cord from AC outlet.

NOTES:

The rating plate and safety caution are on the 
bottom and/or the back of the main unit.

The serial number plate is on the battery pack mount.

The rating information and safety caution of the AC 
adapter are on its upper and lower sides.

Caution on Replaceable lithium battery

The battery used in this device may present a fire or 
chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C or 
incinerate.
Replace battery with Panasonic (Matsushita 
Electric), Sanyo, Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is 
incorrectly replaced.

Dispose of used battery promptly.

Keep away from children.

Do not disassemble and do not dispose of in fire.

Blue to N (Neutral) 
or Black

Brown to L (Live) 
or Red

When the equipment is installed in a cabinet or on a 
shelf, make sure that it has sufficient space on all sides 
to allow for ventilation (10 cm or more on both sides, on 
top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, 
or cloth etc. the heat may not be able to get out.)
No naked flame sources, such as lighted candles, 
should be placed on the apparatus.
When discarding batteries, environmental problems must 
be considered and the local rules or laws governing the 
disposal of these batteries must be followed strictly.
The apparatus shall not be exposed to dripping or 
splashing.
Do not use this equipment in a bathroom or places 
with water.
Also do not place any containers filled with water or 
liquids (such as cosmetics or medicines, flower vases, 
potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment, fire 
or electric shock may be caused.)

Do not point the lens directly into the sun. This can 
cause eye injuries, as well as lead to the 
malfunctioning of internal circuitry. There is also a 
risk of fire or electric shock.

CAUTION!

The following notes concern possible physical 
damage to the camera and to the user.
Carrying or holding the camera by the LCD monitor can 
result in dropping the unit, or in a malfunction.
Do not use a tripod on unsteady or unlevel surfaces. It 
could tip over, causing serious damage to the camera.

CAUTION!

Connecting cables (Audio/Video, S-Video, etc.) to 
the camera and leaving it on top of the TV is not 
recommended, as tripping on the cables will cause 
the camera to fall, resulting in damage.

CAUTION:

To avoid electric 
shock or damage 
to the unit, first 
firmly insert the 
small end of the 
power cord into 
the AC Adapter 
until it is no longer 
wobbly, and then 
plug the larger 
end of the power cord into an AC outlet.

CAUTION:

The mains plug shall remain readily operable.

M6E3PAL.book  Page 4  Monday, June 12, 2006  2:20 PM

Summary of Contents for EVERIO GZ-MG47E









































































Reviews: