GETTING STARTED
EN
19
MasterPage: Start_Right
The brightness of the display can be adjusted.
1
Set the power switch to
or
while
pressing down the lock button located on the
switch.
2
Open the LCD monitor fully. (
3
Press
MENU
. The menu screen appears.
4
Press
/
to select [DISPLAY], then press
49
.
5
Press
/
to select
[BRIGHT], and press
49
.
The brightness control
indicator appears.
6
Press
/
until the appropriate brightness
is reached.
7
Press
49
to clear the brightness control
indicator from the display.
1
Adjust the velcro strip.
2
Pass your right hand
through the loop and grasp
the grip.
3
Adjust your thumb and
fingers through the grip to
easily operate the
recording start/stop button,
power switch and zoom
lever. Be sure to fasten the
velcro strip to your
preference.
To attach the camera to a
tripod, align the direction
stud and screw to the
mounting socket and
stud hole on the camera.
Then tighten the screw
clockwise.
●
Some tripods are not
equipped with studs.
Brightness Adjustment of the
Display
Grip Adjustment
Tripod Mounting
M5E3US.book Page 19 Wednesday, September 7, 2005 4:38 PM
