JVC Everio GZ-HD30 Manual Book Download Page 33

Page: 33 / 84

To connect using the AV connector

NOTE

Change the settings in [VIDEO OUTPUT]

to suit the screen size of your television.

(

p. 67)



Playback Operation

After the connection with TV is completed

Turn on the camcorder and the TV.

Set the TV to its VIDEO mode.

(Only when connecting the camcorder to

the VCR/DVD recorder)

Turn on the VCR/DVD recorder, and

set the VCR/DVD recorder to its AUX

input mode.

Start playback on the camcorder.

(

p. 24, 25)

To display camcorder’s on-screen

display on TV

Set [DISPLAY ON TV] to [ON]. (

p. 67)

NOTE

When the video was recorded with x.v.Color™

set to [ON], change the x.v.Color™ setting

on TV. (

p. 64) For details, refer to the TV’s

instruction manual.



AV Cable

DC Connector

AC Adapter

To AC Outlet

AV Connector

AV Input Connector

Summary of Contents for Everio GZ-HD30





















































































Search results

Summary of Contents for Everio GZ-HD30

Reviews:

Related manuals for Everio GZ-HD30

Brands by name

Popular brands

JVC Everio GZ-HD30, Manual Book

Search results

Summary of Contents for Everio GZ-HD30

Reviews:

Related manuals for Everio GZ-HD30

Brands by name

Popular brands