3G and Dual Link equipped
SMPTE 424M/425M/372M
JVC 10-bit video processing
High operating viewing angle
Waveform/Vector scope
LTC & VITC support
Gamma selection
Various marker function
Audio level meter up to 12ch
178°
178°
3G A-1
Level A mapping structure 1
3G A-2
Level A mapping structure 2
3G A-3
Level A mapping structure 3
3G A-4
Level A mapping structure 4
3G B-DS1
Level B data stream 1
3G B-DS2
Level B data stream 2
3G B-DUAL Level B DUAL LINK
0
100
0
100
0
100
0
100
0
100
Viewing angles
Vector Scope
Waveform
HIGHLIGHTS
3G/Dual Link Equipped
1080p uncompressed digital video
data transmitted at a maximum
rate of 60 frames per second at 3
GB/second can be input with one
HD SDI Input. Dual Link is available
through two HD SDI inputs.
IPS (In-Plane-Switching) LCD Panel
IPS panels with wide
viewing angles and low
chromatic variation
ensure minimal colour
change from different
viewing positions.
Gamma Preset
Mode
JVC offers various
pre-set gamma modes
(2.2, 2.35, 2.45, 2.6)
to meet your application needs.
Vector Scope*
High-quality vector scope allows
simple checking of hue and
saturation of digital video signals.
Hue and saturation of colour signal
are detected and displayed as
a vector with resolution of 254 x 254.
Compatible with video,
component, SDI (SD/HD), DVI
(except PC signals) input signals, and offers a double-size display** option
and selection of display position or translucence functions.
Waveform*
Detects video, component (except RGB), SDI, DVI (except PC)
brightness signals and displays them with resolution of 360 x 254 for
SD signals or resolution of 480 x 254 for HD signals. Besides, it is also
possible to perform checks at
the colour signal level of each
colour per screen for R/G/B,
Y/P
B
/P
R
, Y/C
B
/C
R
. Over-level
function enables peak brightness
to be checked at a glance.
The display allows a double-size
display** option, and selection of
display position or translucence
functions.
Advanced Audio Level Meter
The channel number is displayed in each level bar. And, you can check
the status of the audio signal at a glance for Reference Level/Over Level
0 dB, three set levels, and peak hold function.
Audio Level Meter
*Two display sizes cannot be displayed at the same time.
**The position is fixed for double-size display.
Vector scope and waveform
cannot be displayed at
the same time.
Reference Level
Over Level
Peak hold
0dB
1
2
3
4
5
6
Channel No.
R
Y
G
C
B
M
R
Y
G
C
B
M
R
Y
G
C
B
M
R
Y
G
C
B
M
R
Y
G
C
B
M
3G-SDI Input Format
Following signal information can be displayed when
a 3G-SDI signal comes in.
17” Multi-Format LCD Monitor
DT-V17G1Z
Digital closed captioning
