JVC DR-MX1S Instructions Manual Download

Page: 42 / 100

Filename [MX1S_06DVD Operation.fm]

Masterpage:Left+

BASIC OPERATIONS ON DVD DECK

Page 42Saturday, 30 October 2004 16:18

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-minutes interval), and shuts the unit off after
recording is finished.

Press

on the unit to start recording.

Press

again to engage the ITR mode.

●

On the front display panel, “0:30” appears.

If you want to record for more than 30 minutes, press

extend the time. Each press extends recording time by 30 minutes.

NOTES:

●

You can only perform ITR using the

button on the unit.

●

When the recording capacity becomes full during timer recording or
Instant Timer Recording, the unit automatically performs “Relief
Recording” (

墌

pg. 57).

Watch Another Program While Recording On The Unit

While recording is going on, you can watch another program on
the TV by using the TV’s tuner.

NOTE:

It is required that the remote control is set to be able to operate the TV
in advance. (

墌

pg. 78)

During recording, press

TV/VIDEO

to select TV mode if your

unit is connected to the TV via the RF connection.

●

VHS mode is disengaged, and the VIDEO indicator on the front
display panel lights off .

●

The program received on the TV’s tuner is displayed on the TV
screen.

Slide the

TV/CABLE/DBS/DVD

switch to

Press

CH +/–

repeatedly to select the desired channel.

Elapsed Recording Time And Disc Remaining Time
Indication

During recording, press

DISPLAY

repeatedly until the desired

indication appears on the front display panel.

●

Each time you press

DISPLAY

, the time indication changes as

follows:
Elapsed recording time

]

Disc remaining time

]

Clock

]

(Back to

the beginning)

●

You can also check the disc remaining time by pressing

REMAIN

while the unit is stopped or recording is in progress. The list of disc
remaining times for all recording modes appears on the TV screen.

Recording Features

●

Turn on the unit.

●

Turn on the TV and select the video channel (or AV mode).

●

Slide the

TV/CABLE/DBS/DVD

switch to

DVD

●

Press

VHS/HDD/DVD SELECT

on the unit repeatedly or

DVD

the remote so that the DVD lamp lights up on the unit.

DISPLAY

VHS/HDD/DVD

SELECT

TV / VIDEO

REMAIN

DVD

DISPLAY

CH+/-

CABLE/DBS

DVD

VIDEO

indicator lights off.

MX1S_00.book Page 42 Saturday, October 30, 2004 4:18 PM

Summary of Contents for DR-MX1S





































































































Search results

Summary of Contents for DR-MX1S

Reviews:

Related manuals for DR-MX1S

Brands by name

Popular brands

JVC DR-MX1S, Instructions Manual

Search results

Summary of Contents for DR-MX1S

Reviews:

Related manuals for DR-MX1S

Brands by name

Popular brands