EN
39
BASIC OPERATIONS ON HDD DECK
Instant Timer Recording (ITR)
This easy method lets you record for 30 minutes to 6 hours
(selectable in 30 minutes interval), and shuts the unit off after
recording is finished.
1
Press
R
on the unit to start recording.
2
Press
R
again to engage the ITR mode.
●
On the front display panel,
A
0:30
B
appears.
3
If you want to record for more than 30 minutes, press
R
to
extend the time. Each press extends recording time by
30 minutes.
NOTES:
●
You can only perform ITR using the
R
button on the unit.
●
When the recording capacity becomes full during timer recording
or Instant Timer Recording, the unit is automatically shut off.
Watch Another Programme While Recording On The Unit
While recording is going on, you can watch another programme on
the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the
TV in advance. (
A
pg. 66)
1
During recording, press
TV AV/VIDEO
to select TV mode.
●
Video mode is disengaged, and the VIDEO lamp on the unit
lights off.
●
The programme received on the TV’s tuner is displayed on the
TV screen.
2
Slide the
TV/CABLE/SAT/DVD
switch to
TV
.
3
Press
PR +/–
repeatedly to select the desired channel.
NOTE:
If a decoder is connected to the unit (
A
pg. 69), you can select a
scrambled channel as well as other normal channels.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press
DISPLAY
repeatedly until the desired
indication appears on the front display panel.
●
Each time you press
DISPLAY
, the time indication changes as
follows:
Elapsed recording time
N
Disc remaining time
N
Clock
N
(Back
to the beginning)
Receiving Stereo And Bilingual Programmes
Your unit is equipped with a Sound-Multiplex decoder (A2) and a
Digital stereo sound decoder (NICAM) making reception of stereo
and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
NOTES:
●
A
SUPERIMPOSE
B
must be set to
A
AUTO
B
. Otherwise the on-
screen displays will not appear. (
A
pg. 72)
●
If the quality of stereo sound being received is poor, the
broadcast might be received in monaural with better quality.
Recording Features
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
●
Press
HDD
on the remote so that the HDD lamp lights up on
the unit.
7
HDD
TV AV/ VIDEO
HDD
DISPLAY
PR+/-
CABLE/SAT
DVD
TV
HDD lamp
Type of Broadcast Being
Received
On-Screen Display
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
