JVC DR-DX5SEK, Instructions Manual

Page: 35 / 92

Masterpage:Right+
EN
35
Filename [DX5SEK_06DVD Operation.fm]
BASIC OPERATIONS ON DVD DECK
Page 35Thursday, 10 November 2005 16:34
Instant Timer Recording (ITR)
This easy method lets you record for 30 minutes to 6 hours
(selectable in 30-minute intervals), and shuts the unit off after
recording is finished.
1
Press
R
on the unit to start recording.
2
Press
R
again to engage the ITR mode.
●
On the front display panel, A 0:30 B appears.
3
If you want to record for more than 30 minutes, press
R
to
extend the time. Each press extends recording time by 30
minutes.
NOTES:
●
You can only perform ITR using the
R
button on the unit.
●
ITR is not possible during timer recording.
●
When the recording capacity becomes full during timer recording
or Instant Timer Recording, the unit automatically performs
A Relief Recording B (
A
pg. 48).
Watch Another Programme While Recording On The
Unit
While recording is going on, you can watch another programme on
the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the
TV in advance. (
A
pg. 68)
1
During recording, press TV AV/VIDEO to select TV mode.
●
Video mode is disengaged, and the VIDEO indicator on the
front display panel lights off.
●
The programme received on the TV’s tuner is displayed on the
TV screen.
2
Slide the TV/CABLE/SAT/DVD switch to TV .
3
Press PR +/– repeatedly to select the desired channel.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
●
Each time you press DISPLAY , the time indication changes as
follows:
Elapsed recording time
N
Disc remaining time
N
Clock
N
(Back
to the beginning)
●
You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of
disc remaining times for all recording modes appears on the TV
screen.
Recording Features
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD .
●
Press DV/HDD/DVD SELECT on the unit repeatedly or DVD
on the remote so that the DVD lamp lights up on the unit.
R
DV/HDD/DVD
SELECT
TV AV / VIDEO
REMAIN
DVD
DISPLAY
PR+/-
CABLE/SAT
DVD TV
DVD lamp
VIDEO indicator lights off.
DX5SEK_00.book Page 35 Thursday, November 10, 2005 4:35 PM