JVC DR-DX5SEK, Instructions Manual

Page: 28 / 92

Filename [DX5SEK_06DVD Operation.fm]
Masterpage:Left+
28
EN
BASIC OPERATIONS ON DVD DECK
Page 28Thursday, 10 November 2005 16:34
Subtitle Selection
Some DVD VIDEO discs contain more than one subtitle language,
from among which you can choose the desired subtitle language.
A
h
B appears on the TV screen at the beginning of the part where
more than one subtitle language are recorded.
1
Press SUBTITLE during
playback. The subtitle selection
display appears on the TV
screen.
●
Each time you press
SUBTITLE , the subtitle display
is switched on and off.
2
Press selection keys to select your desired language.
●
To clear the subtitle selection display, press ENTER .
NOTES:
●
When
A
7
B
appears on the TV screen, no subtitle language is
recorded.
●
When the subtitle language won’t be changed with the procedure
above, change the subtitle on a disc menu displayed by pressing
MENU .
Audio Channel Selection
When watching bilingual programmes or playing discs on which
you recorded bilingual or stereo programmes, you can choose the
desired audio channel.
●
When
A
SUPERIMPOSE
B
is set to
A
AUTO
B
, you can confirm on
the TV screen the audio channel you have chosen. (
A
pg. 73)
●
Each time you press AUDIO , the audio
channel changes.
NOTE:
It is not possible for DVD-R/DVD-RW (Video mode) disc playback
to switch the audio channel. The audio channel is played back as
set in
A
VIDEO MODE RECORDING AUDIO
B
setting. (
A
pg. 72)
When you can’t switch the audio channel of a bilingual
programme
When the unit is connected with a digital audio device using an
optional optical cable and
A
DIGITAL AUDIO OUT
B
is set to
A
DOLBY
DIGITAL/PCM B , it is not possible to switch the audio channel of a
bilingual programme recorded on a DVD-RAM or DVD-RW (VR
mode) disc. (
A
pg. 70) In this case, perform the following steps
using the remote control to switch
A
DIGITAL AUDIO OUT
B
from
A DOLBY DIGITAL/PCM B to A PCM ONLY B .
A
Press SET UP to access the Main Menu screen.
B
Press selection keys to select A DVD VIDEO SET UP B , then
press
G
.
C
Press selection keys to select A AUDIO OUTPUT B , then press
G
.
D
Press selection keys to select A DIGITAL AUDIO OUT B , then
press ENTER .
E
Press selection keys to select A PCM ONLY B , then press
ENTER . (
A
pg. 71)
F
Press SET UP to complete the setting.
G
Press AUDIO to select the desired audio channel.
Audio Language/Sound Selection
Some DVD VIDEO discs contain the multiple audio language or
sound. You can select the desired audio language or sound. For
some Video CD/SVCD discs, you can switch the audio channel to
choose Karaoke either with or without the vocal.
1
Press AUDIO during playback.
The Audio Language/Sound
selection display appears.
2
Press AUDIO or selection
keys to select your desired
audio language/sound.
●
Each time you press AUDIO or the selection keys , the audio
language/sound changes.
●
To clear the Audio Language/Sound selection display, press
ENTER .
NOTES:
●
When A
7
B appears on the TV screen, no other audio language is
recorded.
●
When the audio language won’t be changed with the procedure
above, change the audio on a disc menu displayed by pressing
MENU .
●
Pressing AUDIO to select the audio language/sound is only
possible during playback. It is not possible to select by pressing
AUDIO in stop mode. However, you can select the desired audio
language/sound from the setup menu while in stop mode.
Playback Control (PBC) Function
Some Video CD/SVCD discs support the PBC function. PBC is an
abbreviation of
A Play Back Control B . A Video CD/SVCD disc
recorded with PBC has its own menus, such as a list of the songs
on the disc. You can locate a specific scene by using the menu.
1
Press
I
in stop mode. The PBC menu appears.
2
Press the number keys to enter the number of the desired
scene, then press ENTER . The unit starts playback of the
selected item.
●
A
PBC
B
appears on the front display panel.
●
When A NEXT B or A PREVIOUS B appears on the TV screen:
Pressing NEXT (
T
) advances to the next page.
Pressing PREVIOUS (
S
) returns to the previous page.
●
You can return to the menu by pressing RETURN .
●
The method of the operation is different depending on the disc.
NOTE:
If you want to playback a PBC-compatible Video CD/SVCD disc
without activating the PBC function, start playback with the PBC
function, then press
o
to stop playback. The TV screen becomes
all blue. Then start playback in stop mode by using the number
keys to choose the track, then press ENTER .
TRACK
USE
On-Screen Display
For main audio of bilingual programme
For sub audio of bilingual programme
For stereo discs
For audio of left channel
For audio of right channel
When 3 subtitle languages are
contained.
ENGLISH
When 3 audio languages are
contained.
For example: DVD VIDEO
ENGLISH
DX5SEK_00.book Page 28 Thursday, November 10, 2005 4:35 PM