manualshive.com logo in svg

JVC DLA-VS4010, Instructions Manual, Page: 59 / 64

Share
Download
JVC DLA-VS4010 Instructions Manual Download Page 59

Routine Servicing

Clean dirt on the cabinet

Do this with a soft cloth. In case of heavy soiling, soak a cloth in neutral detergent diluted with water, wring dry and

wipe, followed by wiping again using a dry cloth.
Pay attention to the following to prevent the cabinet from deteriorating in condition, getting damaged, or the paint from

coming off.

0

Do not wipe with a stiff cloth

0

Do not wipe with force

0

Do not wipe with thinner or benzene

0

Do not spray volatile chemicals like insecticide

0

Do not allow prolonged contact with rubber or plastic products

Remove dirt that is attached to the vent holes

Do this using a vacuum cleaner. Wipe using a cloth if a vacuum cleaner cannot be used. Leaving dust attached may

prevent adjustment of the internal temperature and result in malfunction of the projector.

Clean dirt on the lens

Do this using commercial blowers or lens cleaning papers (for cleaning glasses and cameras).
Do not use fluid-type cleaning agents. This may lead to peeling of the surface coating film.
Lens surface is fragile. Avoid rubbing or knocking it.

59

Others

Summary of Contents for DLA-VS4010

































































Reviews:

No comments