JVC DLA-HD10KSU/E Instructions Manual Download

Page: 11 / 50

Controls and Features

Indicator

Please refer to

Indicators

(

Page 14) for details.

Air Inlets (2 in front and 1 at bottom surface)

The air inlets absorb air to cool the interior of the unit.
Do not block or allow warm air to blow into them. This
may cause the unit to malfunction.

Power Zoom Lens

DLA-HD10KU/E :1.9x power zoom lens

DLA-HD10KSU/E:1.4x power zoom lens

●

Before projection, remove the lens cap. (

Page 26)

Remote Sensor (Front)

When operating with the remote control, aim it
towards the sensor. (

Page 23)

●

A remote sensor is also located on the rear of the unit.

Lens Cap

●

Fit the cap on the lens when this unit is not in use to
prevent the lens from becoming dirty. (

Page 26)

Lens Shift Cover

Remove this cover when using the Lens Shift feature
for shifting the projecting position in the vertical
direction. (

Page 22)

Foot

It is set at the lowest position when shipped from the
factory. This unit does not come with a function to
adjust the gradient.

Filter

Cleans air drawn in from the air inlet. Please clean this
filter regularly. (

Page 39)

Front Side/Top Surface/Bottom Surface

Bottom Surface

ENGLISH

DLA-HD10_EN-FR.book Page 11 Thursday, November 10, 2005 12:54 PM

Downloaded from ProjectorsManual.com Manuals

Summary of Contents for DLA-HD10KSU/E



















































Search results

Summary of Contents for DLA-HD10KSU/E

Reviews:

Related manuals for DLA-HD10KSU/E

Brands by name

Popular brands

JVC DLA-HD10KSU/E, Instructions Manual

Search results

Summary of Contents for DLA-HD10KSU/E

Reviews:

Related manuals for DLA-HD10KSU/E

Brands by name

Popular brands